The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-356-3732, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Keysight Technologies Inc. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-356-3732 |
| Primary Part Number | 5060-3534 |
| Item Name | Resistor,variable,wire Wound,non |
| FSC / FSG | 5905 / 59 — Resistor |
| Manufacturer | Keysight Technologies Inc |
| Status | ACTIVE |
| Nonturn Device Location | AT 3 OCLOCK AND AT 6 OCLOCK AND AT 9 OCLOCK AND AT 12 OCLOCK |
| Body Diameter | 1.125 INCHES NOMINAL IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Undercut Length | 0.375 INCHES NOMINAL IN |
| Electrical Resistance Per Section | 10.0 KILOHMS 1ST SECTION |
| Electrical Resistance Per Section | 100.0 OHMS 2ND SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 105.0 ALL SECTIONS |
| Section Quantity | 2 |
| Shaft Diameter | 0.265 INCHES NOMINAL IN |
| Nonturn Device Radius | 0.531 INCHES NOMINAL IN |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Mounting Method | LOCKING BUSHING |
| Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius | -20.0 TO 20.0 ALL SECTIONS |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Shaft Style | ROUND, STEPPED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 1.250 INCHES NOMINAL IN |
| Undercut Diameter | 0.187 INCHES NOMINAL IN |
| Body Length | 0.594 INCHES NOMINAL IN |
| Power Dissipation Rating Per Section in Watts | 2.0 FREE AIR ALL SECTIONS |
| Effective Electrical Rotation in Deg Angular Rotation | 280.0 NOMINAL |
| Screw Thread Diameter | 0.375 INCHES NOMINAL IN |
| Reliability Indicator | NOT ESTABLISHED |
| Screw Thread Series Designator | UNEF |
| Actuator Travel Control Feature | STOPS |
| Resistance Tolerance Per Section in Percent | -5.0 TO 5.0 1ST SECTION |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 2ND SECTION |
| Terminal Type and Quantity | 6 TAB, SOLDER LUG |
| Rotary Actuator Travel in Angular Deg | 300.0 NOMINAL |
| Mounting Bushing Length | 0.500 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 5060-3534 PRIMARY | Keysight Technologies Inc (USA) |
| Reference | Meaning |
|---|---|
| D43 | 5/1 Secondary reference Clarostat Sensors and Controls |
| 2100-0997 | C/1 Advisory reference — outside the item-of-supply concept Agilent Technologies Inc. Div Power Products Site |
| 5060-3534 | 5/9 Secondary reference Hewlett-Packard Company Dba HP |
| 43-1002J 1000K | 5/1 Secondary reference Clarostat Sensors and Controls |
| 5060-3534 | 3/9 Design control — primary reference Keysight Technologies, Inc. |
| 2100-0997 | 5/9 Secondary reference Hewlett-Packard Company Dba HP |
NSN 5905-00-356-3732 is a Resistor,variable,wire Wound,non, manufactured by Keysight Technologies Inc, classified under FSC 5905, Resistor. Status: active.
NSN 5905-00-356-3732 has 1 manufacturer part number on file: 5060-3534 (Keysight Technologies Inc).
1 possible match (shared part number, not a government interchangeability claim): 5340-00-670-1832. Verify interchangeability with system specifications before substitution.
Key specifications for 5060-3534: Nonturn Device Location: AT 3 OCLOCK AND AT 6 OCLOCK AND AT 9 OCLOCK AND AT 12 OCLOCK; Body Diameter: 1.125 INCHES NOMINAL IN; Screw Thread Quantity Per Inch: 32.0; Undercut Length: 0.375 INCHES NOMINAL IN. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.