PartsTable TECHNICAL DATA SHEET
NSN 5905-00-320-9881Government record, cited

Resistor, Variable, Wire Wound, Pre5905-00-320-9881

NSN 5905-00-320-9881 · NIIN 003209881 · Part number 93861
Unison Industries Llc · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 59501
Government record, cited
NSN 5905-00-320-9881 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-320-9881. Manufacturer of record part number: 93861.
Also searched as  5905-00-320-9881 · 5905003209881 · NIIN 003209881 · 00-320-9881 · FSC 5905 Resistor · CAGE 59501 · 93861 · 747-6246
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,pre — FSC 5905
  • Body Diameter: 2.188 INCHES NOMINAL IN
  • Electrical Resistance Per Section: 15.0 KILOHMS 1ST SECTION AND 15.0 KILOHMS 2ND SECTION AND 10.0 KILOHMS 3RD SECTION
  • Mounting Lip Depth: 0.0930 INCHES MAXIMUM IN
  • Undercut Width: 0.0930 INCHES MAXIMUM IN
  • Section Quantity: 3
  • Shaft Diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
  • Undercut Diameter: 1.373 INCHES MINIMUM AND 1.374 INCHES MAXIMUM IN
Identification
  • NSN: 5905-00-320-9881
  • NIIN: 003209881
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 93861
  • Manufacturer: Unison Industries Llc
General Description

The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-320-9881, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Unison Industries Llc. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-320-9881
Primary Part Number93861
Item NameResistor,variable,wire Wound,pre
FSC / FSG5905 / 59 — Resistor
ManufacturerUnison Industries Llc
StatusACTIVE
Body Diameter2.188 INCHES NOMINAL IN
Electrical Resistance Per Section15.0 KILOHMS 1ST SECTION AND 15.0 KILOHMS 2ND SECTION AND 10.0 KILOHMS 3RD SECTION
Mounting Lip Depth0.0930 INCHES MAXIMUM IN
Undercut Width0.0930 INCHES MAXIMUM IN
Section Quantity3
Shaft Diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
Undercut Diameter1.373 INCHES MINIMUM AND 1.374 INCHES MAXIMUM IN
Fragility FactorMODERATELY DELICATE
Function Characteristic Per SectionALL SECTIONS LINEAR
Body StyleCYLINDRICAL SERVO MOUNTED
Function Conformity Tolerance Per Section-0.30 TO 0.30 1ST SECTION AND -0.20 TO 0.20 2ND SECTION AND -0.50 TO 0.50 3RD SECTION
Mounting MethodCLAMP RING(S)
Maximum Starting Torque6.00 INCH-OUNCES IN
Fixed Tap Quantity Per Section7 3RD SECTION
Terminal LocationRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Mounting Lip Diameter2.1870 INCHES MAXIMUM IN
Shaft StyleROUND
Actuator TypeSINGLE SHAFT
Shaft Length0.500 INCHES NOMINAL IN
Pilot Diameter1.3730 INCHES MINIMUM AND 1.3740 INCHES MAXIMUM IN
Body Length3.375 INCHES NOMINAL IN
Pilot Length0.0930 INCHES MAXIMUM IN
Tap Location Tolerance Per Section-1.0 TO 1.0 DEG ANGULAR ROTATION 3RD SECTION
Power Dissipation Rating Per Section in Watts2.0 FREE AIR ALL SECTIONS
Effective Electrical Rotation in Deg Angular Rotation320.0 NOMINAL
Bearing TypeBEARING SHAFT
Reliability IndicatorNOT ESTABLISHED
Actuator Travel Control FeatureCONTINUOUS MOTION
Tap Location From Ccw Terminal Per Section in Deg of Effective Electrical Rotation60.0 3RD SECTION AND 91.5 3RD SECTION AND 132.0 3RD SECTION AND 145.0 3RD SECTION AND 172.0 3RD SECTION AND 240.0 3RD SECTION AND 307.0 3RD SECTION
Test Data Document03848-93861 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5920-00-636-0957 POSSIBLE MATCH
FUSE,CARTRIDGE
Possible match (shared part number)
5310-01-285-012693-861 POSSIBLE MATCH
WASHER,KEY
Possible match (shared part number)Elbit Systems C4i and Cyber Ltd Div C4i and Cyber
Cross-Reference Index
Part NumberManufacturer
93861 Unison Industries Llc (USA)
747-6246 Servo Instrument Corporation (USA)
200C319 Samarius Precision Instruments, Inc. Dba Samarius Precision Instruments (USA)
Reference documents
ReferenceMeaning
93861 5/9 Secondary reference
U.S. Government activity
93861 5/9 Secondary reference
U.S. Government activity
93861 5/9 Secondary reference
Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney
RV2-S191A 5/9 Secondary reference
U.S. Government activity
93861 3/9 Design control — primary reference
Arma Div Ambac Industries Inc
Related Parts
5920-00-636-0957POSSIBLE MATCH
FUSE,CARTRIDGE
5310-01-285-0126POSSIBLE MATCH
WASHER,KEY
93-861

Frequently Asked Questions

What is NSN 5905-00-320-9881?

NSN 5905-00-320-9881 is a Resistor,variable,wire Wound,pre, manufactured by Unison Industries Llc, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-320-9881?

NSN 5905-00-320-9881 has 3 manufacturer part numbers on file: 93861 (Unison Industries Llc), 747-6246 (Servo Instrument Corporation), 200C319 (Samarius Precision Instruments, Inc. Dba Samarius Precision Instruments).

What NSN replaces 5905-00-320-9881?

2 possible matches (shared part number, not a government interchangeability claim): 5920-00-636-0957, 5310-01-285-0126. Verify interchangeability with system specifications before substitution.

What are the specifications of 93861?

Key specifications for 93861: Body Diameter: 2.188 INCHES NOMINAL IN; Electrical Resistance Per Section: 15.0 KILOHMS 1ST SECTION AND 15.0 KILOHMS 2ND SECTION AND 10.0 KILOHMS 3RD SECTION; Mounting Lip Depth: 0.0930 INCHES MAXIMUM IN; Undercut Width: 0.0930 INCHES MAXIMUM IN. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-320-9881 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com