PartsTable TECHNICAL DATA SHEET
NSN 5905-00-251-9080Government record, cited

Resistor, Variable, Wire Wound, Non5905-00-251-9080

NSN 5905-00-251-9080 · NIIN 002519080 · Part number HA0162
Ohmite Holding, L.l.c. Dba Ohmite Manufacturing · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 44655
Government record, cited
NSN 5905-00-251-9080 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-251-9080. Manufacturer of record part number: HA0162.
Also searched as  5905-00-251-9080 · 5905002519080 · NIIN 002519080 · 00-251-9080 · FSC 5905 Resistor · CAGE 44655 · HA0162 · 2844130-2
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Nonturn Device Location: AT 6 OCLOCK
  • Body Diameter: 1.547 INCHES MINIMUM AND 1.577 INCHES MAXIMUM IN
  • Screw Thread Quantity Per Inch: 32.0
  • Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 340.0 SINGLE SECTION
  • Section Quantity: 1
  • Shaft Diameter: 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
Identification
  • NSN: 5905-00-251-9080
  • NIIN: 002519080
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: HA0162
  • Manufacturer: Ohmite Holding, L.l.c. Dba Ohmite Manufacturing
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-251-9080, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Ohmite Holding, L.l.c. Dba Ohmite Manufacturing. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-251-9080
Primary Part NumberHA0162
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
ManufacturerOhmite Holding, L.l.c. Dba Ohmite Manufacturing
StatusACTIVE
Nonturn Device LocationAT 6 OCLOCK
Body Diameter1.547 INCHES MINIMUM AND 1.577 INCHES MAXIMUM IN
Screw Thread Quantity Per Inch32.0
Electrical Resistance Per Section5.0 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power340.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
Nonturn Device Radius0.502 INCHES MINIMUM AND 0.522 INCHES MAXIMUM IN
Body StyleCYLINDRICAL BUSHING MOUNTED
Overall Diameter1.719 INCHES NOMINAL IN
Contact Arm Electrical Off PositionFULLY CCW
First Flat Length0.328 INCHES MINIMUM AND 0.358 INCHES MAXIMUM IN
Mounting MethodSTANDARD BUSHING
Maximum Starting Torque40.00 INCH-OUNCES IN
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Shaft StyleROUND, FLATTED
Actuator TypeSINGLE SHAFT
Shaft Length0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
Body Length1.360 INCHES MINIMUM AND 1.390 INCHES MAXIMUM IN
Maximum Stop Torque240.00 INCH-OUNCES IN
Power Dissipation Rating Per Section in Watts10.0 FREE AIR SINGLE SECTION
Effective Electrical Rotation in Deg Angular Rotation275.0 MINIMUM AND 305.0 MAXIMUM
Screw Thread Diameter0.375 INCHES NOMINAL IN
Reliability IndicatorNOT ESTABLISHED
Screw Thread Series DesignatorUNEF
Actuator Travel Control FeatureSTOPS
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Terminal Type and Quantity3 TAB, SOLDER LUG
Rotary Actuator Travel in Angular Deg275.0 MINIMUM AND 305.0 MAXIMUM
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
HA0162 PRIMARY Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA)
2844130-2 Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA)

Frequently Asked Questions

What is NSN 5905-00-251-9080?

NSN 5905-00-251-9080 is a Resistor,variable,wire Wound,non, manufactured by Ohmite Holding, L.l.c. Dba Ohmite Manufacturing, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-251-9080?

NSN 5905-00-251-9080 has 2 manufacturer part numbers on file: HA0162 (Ohmite Holding, L.l.c. Dba Ohmite Manufacturing), 2844130-2 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier).

What are the specifications of HA0162?

Key specifications for HA0162: Nonturn Device Location: AT 6 OCLOCK; Body Diameter: 1.547 INCHES MINIMUM AND 1.577 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0; Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-251-9080 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com