The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-246-8655, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Bourns Inc. Government technical data includes 27 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 6 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 4 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-246-8655 |
| Primary Part Number | 3282H1-203 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Bourns Inc |
| Status | ACTIVE |
| Shaft Style | ROUND, SLOTTED |
| Lateral Distance Between Mounting Hole Centers | 0.175 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN |
| Mounting Facility Quantity | 2 |
| Shaft Diameter | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -100.0 TO 100.0 SINGLE SECTION |
| Body Style | RECTANGULAR W/MOUNTING HOLES |
| Actuator Travel Control Feature | STOPS |
| Terminal Type and Quantity | 3 PIN |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 70.0 SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 175.0 SINGLE SECTION |
| Rotary Actuator Travel in Angular Deg | 9000.0 NOMINAL |
| Electrical Resistance Per Section | 20.0 KILOHMS SINGLE SECTION |
| Mounting Method | TERMINAL |
| Center to Center Distance Between Center Terminal and Outside Terminal | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN |
| Terminal Location | LOWER ADJACENT SIDE SINGLE ROW |
| Body Width | 0.187 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN |
| Shaft Length | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN |
| Body Length | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN |
| Body Height | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN |
| Section Quantity | 1 |
| Reliability Indicator | NOT ESTABLISHED |
| Terminal Length | 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN |
| Center to Center Distance Between Terminals | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| Power Dissipation Rating Per Section in Watts | 1.0 FREE AIR SINGLE SECTION |
| Mounting Hole Diameter | 0.074 INCHES MINIMUM IN |
| Actuator Type | SINGLE SHAFT |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 3282H1-203 | Bourns Inc (USA) |
| 3282H1-203 | Bourns Instruments Inc (USA) |
| DMS 84013B | Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) (USA) |
| 303-00001-01 | Oeco, Llc Dba Pacific Scientific Oeco Div Fire Safety and Power Systems (USA) |
| 93680 | International Resistive Company, Inc. Div Wire and Film Technologies (waft) (USA) |
| RC32GF680J | International Resistive Company, Inc. Div Wire and Film Technologies (waft) (USA) |
NSN 5905-00-246-8655 is a Resistor,variable,nonwire Wound,, manufactured by Bourns Inc, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-00-246-8655 has 6 cross-referenced part numbers: 3282H1-203 (Bourns Inc), 3282H1-203 (Bourns Instruments Inc), DMS 84013B (Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)), 303-00001-01 (Oeco, Llc Dba Pacific Scientific Oeco Div Fire Safety and Power Systems), 93680 (International Resistive Company, Inc. Div Wire and Film Technologies (waft)) and 1 more.
There are 4 known substitutes for 5905-00-246-8655: 5905-00-246-8695, 5905-00-279-1733, 4720-00-523-3405 and 1 more. Verify interchangeability with system specifications before substitution.
Key specifications for 3282H1-203: Shaft Style: ROUND, SLOTTED; Lateral Distance Between Mounting Hole Centers: 0.175 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN; Overall Width: 0.187 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN; Mounting Facility Quantity: 2. 30 total characteristics are documented in the Federal Logistics Information System.