PartsTable TECHNICAL DATA SHEET
NSN 5905-00-231-3857Government record, cited

Resistor, Variable, Wire Wound, Pre5905-00-231-3857

NSN 5905-00-231-3857 · NIIN 002313857 · Part number 2552839
Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 10001
Government record, cited
NSN 5905-00-231-3857 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-231-3857. Manufacturer of record part number: 2552839.
Also searched as  5905-00-231-3857 · 5905002313857 · NIIN 002313857 · 00-231-3857 · FSC 5905 Resistor · CAGE 10001 · 2552839
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,pre — FSC 5905
  • Maximum Running Torque: 3.40 INCH-OUNCES IN
  • Body Diameter: 3.031 INCHES MAXIMUM IN
  • Lateral Runout: 0.001 INCHES IN
  • Electrical Resistance Per Section: 5.0 KILOHMS ALL SECTIONS
  • Mounting Lip Depth: 0.0930 INCHES NOMINAL IN
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 125.0 ALL SECTIONS
  • Undercut Width: 0.0730 INCHES MINIMUM IN
Identification
  • NSN: 5905-00-231-3857
  • NIIN: 002313857
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 2552839
  • Manufacturer: Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
General Description

The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-231-3857, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-231-3857
Primary Part Number2552839
Item NameResistor,variable,wire Wound,pre
FSC / FSG5905 / 59 — Resistor
ManufacturerNavair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
StatusACTIVE
Maximum Running Torque3.40 INCH-OUNCES IN
Body Diameter3.031 INCHES MAXIMUM IN
Lateral Runout0.001 INCHES IN
Electrical Resistance Per Section5.0 KILOHMS ALL SECTIONS
Mounting Lip Depth0.0930 INCHES NOMINAL IN
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power125.0 ALL SECTIONS
Undercut Width0.0730 INCHES MINIMUM IN
Section Quantity4
Shaft Diameter0.2497 INCHES MAXIMUM IN
Undercut Diameter2.875 INCHES MAXIMUM IN
Function Characteristic Per Section1ST SECTION EQUATION AND 2ND SECTION EQUATION AND 3RD SECTION EQUATION AND 4TH SECTION TABLE
Body StyleCYLINDRICAL SERVO MOUNTED
Function Conformity Tolerance Per Section-0.50 TO 0.50 1ST SECTION AND -0.35 TO 0.35 2ND SECTION AND -0.50 TO 0.50 3RD SECTION AND -0.50 TO 0.50 4TH SECTION
Shaft End Play0.0025 INCHES IN
Overall Diameter3.265 INCHES MAXIMUM IN
Mounting MethodCLAMP RING(S)
Maximum Starting Torque4.50 INCH-OUNCES IN
Fixed Tap Quantity Per Section2 1ST SECTION AND 1 2ND SECTION AND 1 3RD SECTION AND 1 4TH SECTION
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-150.0 TO 150.0 ALL SECTIONS
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Mounting Lip Diameter3.0000 INCHES MAXIMUM IN
Shaft StyleROUND, SLOTTED
Actuator TypeDOUBLE ENDED SHAFT
Shaft Length0.718 INCHES NOMINAL IN
Pilot Diameter2.8750 INCHES MAXIMUM IN
Body Length3.200 INCHES MAXIMUM IN
Shaft Runout0.001 INCHES IN
Pilot Length0.0620 INCHES NOMINAL IN
Tap Location Tolerance Per Section-1.0 TO 1.0 DEG ANGULAR ROTATION ALL SECTIONS
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
2552839 PRIMARY Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA)
Reference documents
ReferenceMeaning
2552839 5/1 Secondary reference
Bei Sensors & Systems Company, Inc. Dba Bei Duncan
2552839 5/1 Secondary reference
Honeywell International Inc Dba Honeywell International Div New England Instrument (nei)
2552839 5/1 Secondary reference
Cognitive Resources Inc Dba Gamewell Co the
2552839 5/1 Secondary reference
Vishay Sprague Inc
2552839 5/9 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136
RESISTOR NETWORK,FIXED,FILM
5905-00-000-0488
5905-00-000-0488 · Item name not on file
5905-00-000-8809
5905-00-000-8809 · Item name not on file
5905-00-000-8833
5905-00-000-8833 · Item name not on file
5905-00-000-9526
5905-00-000-9526 · Item name not on file
5905-00-001-1342
5905-00-001-1342 · Item name not on file
5905-00-001-1573
5905-00-001-1573 · Item name not on file
5905-00-001-2059
5905-00-001-2059 · Item name not on file

Frequently Asked Questions

What is NSN 5905-00-231-3857?

NSN 5905-00-231-3857 is a Resistor,variable,wire Wound,pre, manufactured by Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-231-3857?

NSN 5905-00-231-3857 has 1 manufacturer part number on file: 2552839 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier).

What are the specifications of 2552839?

Key specifications for 2552839: Maximum Running Torque: 3.40 INCH-OUNCES IN; Body Diameter: 3.031 INCHES MAXIMUM IN; Lateral Runout: 0.001 INCHES IN; Electrical Resistance Per Section: 5.0 KILOHMS ALL SECTIONS. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-231-3857 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com