PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

J1142B6534Resistor,variable,wire Wound,non

Pax Mfg Corp Pax Electronics Div · NSN 5905-00-186-3125 · FSC 5905 · No Item Name Available
Verified by PartsTable
NSN 5905-00-186-3125 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-186-3125. Primary manufacturer part number: J1142B6534.
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Overall Diameter: 2.260 INCHES MAXIMUM IN
  • Body Diameter: 1.680 INCHES MAXIMUM IN
  • Section Quantity: 1
  • Bearing Type: SLEEVE SHAFT
  • Features Provided: HUMIDITY PROOF
  • Maximum Starting Torque: 40.00 INCH-OUNCES IN
  • Maximum Stop Torque: 240.00 INCH-OUNCES IN
Applications
  • Electrical power distribution
  • Signal transmission
  • Equipment interconnection
  • Circuit regulation and filtering
  • Signal conditioning
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-186-3125, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Pax Mfg Corp Pax Electronics Div. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 9 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 5 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.

Technical Specifications
ParameterValue
NSN5905-00-186-3125
Primary Part NumberJ1142B6534
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — No Item Name Available
ManufacturerPax Mfg Corp Pax Electronics Div
StatusCANCELLED
Overall Diameter2.260 INCHES MAXIMUM IN
Body Diameter1.680 INCHES MAXIMUM IN
Section Quantity1
Bearing TypeSLEEVE SHAFT
Features ProvidedHUMIDITY PROOF
Maximum Starting Torque40.00 INCH-OUNCES IN
Maximum Stop Torque240.00 INCH-OUNCES IN
Screw Thread Quantity Per Inch32.0
Screw Thread Diameter0.375 INCHES NOMINAL IN
Rotary Actuator Travel in Angular Deg275.0 MINIMUM AND 305.0 MAXIMUM
Mounting MethodSTANDARD BUSHING
Actuator TypeSINGLE SHAFT
Nonturn Device Radius0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
Fragility FactorMODERATELY RUGGED
Screw Thread Series DesignatorUNEF
Nonturn Device LocationAT 12 OCLOCK
Electrical Resistance Per Section50.0 OHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power340.0 SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Full Rated Power25.0 SINGLE SECTION
Terminal Type and Quantity3 TAB, SOLDER LUG
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Actuator Travel Control FeatureSTOPS
Test Data Document81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Specification/standard Data81349-MIL-R-22/3 GOVERNMENT SPECIFICATION
Power Dissipation Rating Per Section in Watts25.0 HEAT SINK SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Shaft Length0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN
Body StyleCYLINDRICAL BUSHING MOUNTED
Shaft StyleROUND, SLOTTED
Lifecycle & Compliance
Acquisition StatusCANCELLED
HAZMATNo
Verified Substitutes 5
5905-00-539-4580 INTERCHANGEABLE
Resistor,variable,wire Wound,non
5905-00-681-5037 INTERCHANGEABLE
Resistor,variable,wire Wound,non
9150-00-935-4090 INTERCHANGEABLE
Lubricating Oil,aircraft Turbine
9330-01-168-2287112-4640706 ITEM 10 INTERCHANGEABLE
Plastic,strip
Naval Ship Systems Command
8115-01-535-0149CP404828TS002 INTERCHANGEABLE
Pallet,plastic
Shuert Industries, Inc. Dba Shuert Industries Inc
Cross-Reference Index
Part NumberManufacturer
J1142B6534 Pax Mfg Corp Pax Electronics Div (USA)
0149 Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA)
RP101SD500KK Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
MIL-PRF-22/3 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
K211R1133 National Weather Service Dba National Weather Service Ohd1 Div Office of Operational Systems (USA)
M22/03-00111SD Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
MILR22-3 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
8176067 Us Army Aviation and Missile Command (USA)
H0149 Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA)
Related Parts
5905-00-539-4580INTERCHANGEABLE
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-00-681-5037INTERCHANGEABLE
RESISTOR,VARIABLE,WIRE WOUND,NON
9150-00-935-4090INTERCHANGEABLE
LUBRICATING OIL,AIRCRAFT TURBINE
9330-01-168-2287INTERCHANGEABLE
PLASTIC,STRIP
112-4640706 ITEM 10
8115-01-535-0149INTERCHANGEABLE
PALLET,PLASTIC
CP404828TS002

Frequently Asked Questions

What is NSN 5905-00-186-3125?

NSN 5905-00-186-3125 is a Resistor,variable,wire Wound,non, manufactured by Pax Mfg Corp Pax Electronics Div, classified under FSC 5905 (No Item Name Available). Status: cancelled.

What are the part numbers for NSN 5905-00-186-3125?

NSN 5905-00-186-3125 has 9 cross-referenced part numbers: J1142B6534 (Pax Mfg Corp Pax Electronics Div), 0149 (Ohmite Holding, L.l.c. Dba Ohmite Manufacturing), RP101SD500KK (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-22/3 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), K211R1133 (National Weather Service Dba National Weather Service Ohd1 Div Office of Operational Systems) and 4 more.

What NSN replaces 5905-00-186-3125?

There are 5 known substitutes for 5905-00-186-3125: 5905-00-539-4580, 5905-00-681-5037, 9150-00-935-4090 and 2 more. Verify interchangeability with system specifications before substitution.

What are the specifications of J1142B6534?

Key specifications for J1142B6534: Overall Diameter: 2.260 INCHES MAXIMUM IN; Body Diameter: 1.680 INCHES MAXIMUM IN; Section Quantity: 1; Bearing Type: SLEEVE SHAFT. 30 total characteristics are documented in the Federal Logistics Information System.

Is NSN 5905-00-186-3125 still in active supply?

NSN 5905-00-186-3125 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com