PartsTable TECHNICAL DATA SHEET
NSN 5905-00-159-6781Government record, cited

Resistor, Variable, Wire Wound, Non5905-00-159-6781

NSN 5905-00-159-6781 · NIIN 001596781
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-00-159-6781 · 5905001596781 · NIIN 001596781 · 00-159-6781 · FSC 5905 Resistor · M39015/3-009XM · 39015-3-009XM · RTR24DX502M · MIL-PRF-39015/3 · MILR39015-3
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION
  • Section Quantity: 1
  • Shaft Diameter: 0.078 INCHES NOMINAL IN
  • Fragility Factor: MODERATELY DELICATE
  • Body Style: RECTANGULAR
  • Terminal Length: 0.300 INCHES MINIMUM IN
Identification
  • NSN: 5905-00-159-6781
  • NIIN: 001596781
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-159-6781, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 26 specifications, cited from the U.S. Government catalog. 7 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 2 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-159-6781
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Electrical Resistance Per Section5.0 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power150.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.078 INCHES NOMINAL IN
Fragility FactorMODERATELY DELICATE
Body StyleRECTANGULAR
Terminal Length0.300 INCHES MINIMUM IN
Mounting MethodTERMINAL
Body Width0.170 INCHES NOMINAL IN
Body Height0.420 INCHES MAXIMUM IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-50.0 TO 50.0 SINGLE SECTION
Terminal LocationLOWER ADJACENT SIDE SINGLE ROW LOCATION NOT OTHERWISE SPECIFIED
Reliability Failure Rate Level in Percent1.000
Center to Center Distance Between Center Terminal and Outside Terminal0.100 INCHES NOMINAL IN
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Shaft Length0.080 INCHES MAXIMUM IN
Specification/standard Data81349-MIL-R-39015/3 GOVERNMENT SPECIFICATION
Body Length0.375 INCHES NOMINAL IN
Center to Center Distance Between Terminals0.200 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts0.75 FREE AIR SINGLE SECTION
Reliability IndicatorESTABLISHED
Test Data Document81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-5.0 TO 5.0 SINGLE SECTION
Terminal Type and Quantity3 PIN
Ambient Temp in Deg Celsius Per Section at Full Rated Power85.0 SINGLE SECTION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 2
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5905-01-041-2813 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
5905-01-128-6621 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
M39015/3-009XM 2/2 Government specification standardization
U.S. Government activity
39015-3-009XM 5/9 Secondary reference
U.S. Government activity
RTR24DX502M 5/1 Secondary reference
U.S. Government activity
MIL-PRF-39015/3 4/1 Identification reference
U.S. Government activity
MILR39015-3 5/9 Secondary reference
U.S. Government activity
538091-29 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
M39015-03-009XM 5/2 Secondary reference
U.S. Government activity
Related Parts
5905-01-041-2813POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
5905-01-128-6621POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON

Frequently Asked Questions

What is NSN 5905-00-159-6781?

NSN 5905-00-159-6781 is a Resistor,variable,wire Wound,non, classified under FSC 5905, Resistor. Status: active.

What NSN replaces 5905-00-159-6781?

2 possible matches (shared part number, not a government interchangeability claim): 5905-01-041-2813, 5905-01-128-6621. Verify interchangeability with system specifications before substitution.

What are the specifications of 5905-00-159-6781?

Key specifications for 5905-00-159-6781: Electrical Resistance Per Section: 5.0 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION; Section Quantity: 1; Shaft Diameter: 0.078 INCHES NOMINAL IN. 26 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-159-6781 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com