The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-155-4767, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-155-4767 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Maximum Running Torque | 1.00 INCH-OUNCES IN |
| Body Diameter | 1.468 INCHES MAXIMUM IN |
| Lateral Runout | 0.001 INCHES IN |
| Electrical Resistance Per Section | 427.0 OHMS SINGLE SECTION |
| Mounting Lip Depth | 0.0930 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 125.0 SINGLE SECTION |
| Undercut Width | 0.0750 INCHES MINIMUM IN |
| Section Quantity | 1 |
| Shaft Diameter | 0.2495 INCHES MINIMUM AND 0.2499 INCHES MAXIMUM IN |
| Undercut Diameter | 1.312 INCHES MAXIMUM IN |
| Fragility Factor | MODERATELY RUGGED |
| Function Characteristic Per Section | SINGLE SECTION LINEAR |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Function Conformity Tolerance Per Section | -0.20 TO 0.20 SINGLE SECTION |
| Shaft End Play | 0.001 INCHES IN |
| Overall Diameter | 1.684 INCHES MAXIMUM IN |
| Mounting Method | CLAMP RING(S) |
| Maximum Starting Torque | 1.00 INCH-OUNCES IN |
| Fixed Tap Quantity Per Section | 2 SINGLE SECTION |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -20.0 TO 20.0 SINGLE SECTION |
| Terminal Location | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 1.4370 INCHES MAXIMUM IN |
| Shaft Style | ROUND |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.380 INCHES NOMINAL IN |
| Pilot Diameter | 1.3120 INCHES MAXIMUM IN |
| Body Length | 0.875 INCHES MAXIMUM IN |
| Shaft Runout | 0.001 INCHES IN |
| Pilot Length | 0.0620 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| PVR15-K427 | 5/9 Secondary reference U.S. Government activity |
| 62911002-2 | 5/9 Secondary reference U.S. Government activity |
| 62911002-2 | 3/9 Design control — primary reference Moog Inc. Dba Moog Components Group |
NSN 5905-00-155-4767 is a Resistor,variable,wire Wound,pre, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-00-155-4767: Maximum Running Torque: 1.00 INCH-OUNCES IN; Body Diameter: 1.468 INCHES MAXIMUM IN; Lateral Runout: 0.001 INCHES IN; Electrical Resistance Per Section: 427.0 OHMS SINGLE SECTION. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.