The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-132-0141, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 30 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-132-0141 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — Resistor |
| Status | ACTIVE |
| Maximum Running Torque | 2.00 INCH-OUNCES IN |
| Nonturn Device Location | AT 6 OCLOCK |
| Body Diameter | 1.796 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Lateral Runout | 0.005 INCHES IN |
| Electrical Resistance Per Section | 100.0 OHMS SINGLE SECTION |
| Mounting Lip Depth | 0.0500 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 105.0 SINGLE SECTION |
| Undercut Width | 0.0500 INCHES NOMINAL IN |
| Section Quantity | 1 |
| Shaft Diameter | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN |
| Undercut Diameter | 1.812 INCHES NOMINAL IN |
| Nonturn Device Radius | 0.546 INCHES MINIMUM AND 0.578 INCHES MAXIMUM IN |
| Function Characteristic Per Section | SINGLE SECTION LINEAR |
| Body Style | CYLINDRICAL SERVO MOUNTED |
| Function Conformity Tolerance Per Section | -0.15 TO 0.15 SINGLE SECTION |
| Shaft End Play | 0.005 INCHES IN |
| Mounting Method | STANDARD BUSHING |
| Maximum Starting Torque | 2.00 INCH-OUNCES IN |
| Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius | -20.0 TO 20.0 SINGLE SECTION |
| Terminal Location | UPPER ADJACENT SIDE SINGLE ROW LOCATION NOT OTHERWISE SPECIFIED |
| Mounting Lip Diameter | 0.4050 INCHES NOMINAL IN |
| Shaft Style | ROUND, SLOTTED |
| Actuator Type | SINGLE SHAFT |
| Shaft Length | 0.781 INCHES MINIMUM AND 0.843 INCHES MAXIMUM IN |
| Pilot Diameter | 0.4052 INCHES MINIMUM AND 0.4062 INCHES MAXIMUM IN |
| Body Length | 1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM IN |
| Maximum Stop Torque | 550.00 INCH-OUNCES IN |
| Shaft Runout | 0.002 INCHES IN |
| Pilot Length | 0.0500 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 3400S1-101 | 3/9 Design control — primary reference U.S. Government activity |
| 444-0433-005 | 5/2 Secondary reference U.S. Government activity |
NSN 5905-00-132-0141 is a Resistor,variable,wire Wound,pre, classified under FSC 5905, Resistor. Status: active.
Key specifications for 5905-00-132-0141: Maximum Running Torque: 2.00 INCH-OUNCES IN; Nonturn Device Location: AT 6 OCLOCK; Body Diameter: 1.796 INCHES MINIMUM AND 1.828 INCHES MAXIMUM IN; Screw Thread Quantity Per Inch: 32.0. 30 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.