PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

1910-4Resistor,fixed,wire Wound

Gamble Charles T Industries · NSN 5905-00-125-7567 · FSC 5905 · No Item Name Available
Verified by PartsTable
NSN 5905-00-125-7567 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-125-7567. Primary manufacturer part number: 1910-4.
Features
  • Resistor,fixed,wire Wound — FSC 5905
  • Temp Coefficient of Resistance in Ppm Per Deg Celsius: -20.0 TO 20.0
  • Specification/standard Data: 81349-MIL-R-93/15 GOVERNMENT SPECIFICATION
  • Temp Range of Temp Coefficient in Deg Celsius: -65.0 TO 145.0
  • Terminal Type: TAB, SOLDER LUG
  • Inclosure Type: ENCAPSULATED
  • Test Data Document: 81349-MIL-R-93 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
  • Power Dissipation Rating in Watts: 0.250 FREE AIR
Applications
  • Electrical power distribution
  • Signal transmission
  • Equipment interconnection
  • Circuit regulation and filtering
  • Signal conditioning
General Description

The Resistor,fixed,wire Wound, cataloged under National Stock Number 5905-00-125-7567, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Gamble Charles T Industries. Government technical data includes 16 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-125-7567
Primary Part Number1910-4
Item NameResistor,fixed,wire Wound
FSC / FSG5905 / 59 — No Item Name Available
ManufacturerGamble Charles T Industries
StatusACTIVE
Temp Coefficient of Resistance in Ppm Per Deg Celsius-20.0 TO 20.0
Specification/standard Data81349-MIL-R-93/15 GOVERNMENT SPECIFICATION
Temp Range of Temp Coefficient in Deg Celsius-65.0 TO 145.0
Terminal TypeTAB, SOLDER LUG
Inclosure TypeENCAPSULATED
Test Data Document81349-MIL-R-93 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Power Dissipation Rating in Watts0.250 FREE AIR
Body Diameter0.500 INCHES NOMINAL IN
Body Length0.500 INCHES NOMINAL IN
Ambient Temp at Full Rated Power125.0 CELSIUS DEGC
Reliability IndicatorNOT ESTABLISHED
Terminal Length0.375 INCHES NOMINAL IN
Style DesignatorRADIAL TERMINAL EACH END
Ambient Temp in Deg Celsius at Zero Percent Rated Power145.0
Resistance Tolerance in Percent-0.100 TO 0.100
Electrical Resistance508.000 KILOHMS
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 6
1040-00-300-422819104 INTERCHANGEABLE
Shaft
L3harris Technologies, Inc. Div Space and Airborne Systems
5305-00-988-1721MS35206-277 INTERCHANGEABLE
Screw,machine
National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
5360-00-997-4657 INTERCHANGEABLE
Spring,tension,roll
1620-01-012-143019104-3 INTERCHANGEABLE
Cap,orifice,landing Gear
Northrop Grumman Systems Corporation
5950-01-171-878919/104 INTERCHANGEABLE
Coil,radio Frequency
Gowanda Holdings, Llc Div Gowanda Electronics Corp.
6525-01-525-465719104 INTERCHANGEABLE
Safelight,darkroom,photographic
Wolf X-Ray, Corporation
Cross-Reference Index
Part NumberManufacturer
1910-4 Gamble Charles T Industries (USA)
RB08CE50802B Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
MIL-R-93/15 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
2372334G4 L3harris Technologies, Inc. (USA)
Related Parts
1040-00-300-4228INTERCHANGEABLE
SHAFT
19104
5305-00-988-1721INTERCHANGEABLE
SCREW,MACHINE
MS35206-277
5360-00-997-4657INTERCHANGEABLE
SPRING,TENSION,ROLL
1620-01-012-1430INTERCHANGEABLE
CAP,ORIFICE,LANDING GEAR
19104-3
5950-01-171-8789INTERCHANGEABLE
COIL,RADIO FREQUENCY
19/104
6525-01-525-4657INTERCHANGEABLE
SAFELIGHT,DARKROOM,PHOTOGRAPHIC
19104

Frequently Asked Questions

What is NSN 5905-00-125-7567?

NSN 5905-00-125-7567 is a Resistor,fixed,wire Wound, manufactured by Gamble Charles T Industries, classified under FSC 5905 (No Item Name Available). Status: active.

What are the part numbers for NSN 5905-00-125-7567?

NSN 5905-00-125-7567 has 4 cross-referenced part numbers: 1910-4 (Gamble Charles T Industries), RB08CE50802B (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-R-93/15 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 2372334G4 (L3harris Technologies, Inc.).

What NSN replaces 5905-00-125-7567?

There are 6 known substitutes for 5905-00-125-7567: 1040-00-300-4228, 5305-00-988-1721, 5360-00-997-4657 and 3 more. Verify interchangeability with system specifications before substitution.

What are the specifications of 1910-4?

Key specifications for 1910-4: Temp Coefficient of Resistance in Ppm Per Deg Celsius: -20.0 TO 20.0; Specification/standard Data: 81349-MIL-R-93/15 GOVERNMENT SPECIFICATION; Temp Range of Temp Coefficient in Deg Celsius: -65.0 TO 145.0; Terminal Type: TAB, SOLDER LUG. 16 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com