The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-108-4936, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Ohmite Holding, L.l.c. Dba Ohmite Manufacturing. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 7 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 3 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-108-4936 |
| Primary Part Number | M22/05-00151FD |
| Item Name | Resistor,variable,wire Wound,non |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Ohmite Holding, L.l.c. Dba Ohmite Manufacturing |
| Status | ACTIVE |
| Electrical Resistance Per Section | 75.0 OHMS SINGLE SECTION |
| Actuator Type | SINGLE SHAFT |
| Body Diameter | 2.410 INCHES MAXIMUM IN |
| Mounting Bushing Length | 0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN |
| Flat Height | 0.211 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN |
| Reliability Indicator | NOT ESTABLISHED |
| Nonturn Device Radius | 0.500 INCHES NOMINAL IN |
| Shaft Style | ROUND, FLATTED |
| Rotary Actuator Travel in Angular Deg | 295.0 MINIMUM AND 310.0 MAXIMUM |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 340.0 SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 25.0 SINGLE SECTION |
| Actuator Travel Control Feature | STOPS |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Test Data Document | 81349-MIL-R-22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Specification/standard Data | 81349-MIL-R-22/5 GOVERNMENT SPECIFICATION |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Mounting Method | STANDARD BUSHING |
| Power Dissipation Rating Per Section in Watts | 50.0 HEAT SINK SINGLE SECTION |
| Shaft Diameter | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN |
| Overall Diameter | 3.205 INCHES MAXIMUM IN |
| Maximum Starting Torque | 40.00 INCH-OUNCES IN |
| Body Length | 1.440 INCHES MAXIMUM IN |
| First Flat Length | 0.344 INCHES NOMINAL IN |
| Screw Thread Diameter | 0.375 INCHES NOMINAL IN |
| Body Style | CYLINDRICAL BUSHING MOUNTED |
| Screw Thread Quantity Per Inch | 32.0 |
| Shaft Length | 0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN |
| Screw Thread Series Designator | UNEF |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| M22/05-00151FD | Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA) |
| G-1315 | L3 Technologies, Inc. (USA) |
| MIL-PRF-22/5 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RP151FD750KK | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 55S | Bi Technologies Corporation Div Bi Technologies Corp. (USA) |
| MILR22-5 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M22/05-00151FD | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-00-108-4936 is a Resistor,variable,wire Wound,non, manufactured by Ohmite Holding, L.l.c. Dba Ohmite Manufacturing, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-00-108-4936 has 7 cross-referenced part numbers: M22/05-00151FD (Ohmite Holding, L.l.c. Dba Ohmite Manufacturing), G-1315 (L3 Technologies, Inc.), MIL-PRF-22/5 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RP151FD750KK (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 55S (Bi Technologies Corporation Div Bi Technologies Corp.) and 2 more.
There are 3 known substitutes for 5905-00-108-4936: 2530-00-385-6985, 4940-01-110-7422, 6685-01-133-4304. Verify interchangeability with system specifications before substitution.
Key specifications for M22/05-00151FD: Electrical Resistance Per Section: 75.0 OHMS SINGLE SECTION; Actuator Type: SINGLE SHAFT; Body Diameter: 2.410 INCHES MAXIMUM IN; Mounting Bushing Length: 0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM IN. 30 total characteristics are documented in the Federal Logistics Information System.