PartsTable TECHNICAL DATA SHEET
NSN 5905-00-085-0138Government record, cited

Resistor, Variable, Wire Wound, Non5905-00-085-0138

NSN 5905-00-085-0138 · NIIN 000850138
FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components
Government record, cited
Also searched as  5905-00-085-0138 · 5905000850138 · NIIN 000850138 · 00-085-0138 · FSC 5905 Resistor · 947147-4203 · 418239-36 · RT22C2X203 · MILR27208-4
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Maximum Running Torque: 5.00 INCH-OUNCES IN
  • Electrical Resistance Per Section: 20.0 KILOHMS SINGLE SECTION
  • Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION
  • Section Quantity: 1
  • Shaft Diameter: 0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
  • Body Style: RECTANGULAR W/MOUNTING HOLES
  • Terminal Length: 0.172 INCHES MINIMUM IN
Identification
  • NSN: 5905-00-085-0138
  • NIIN: 000850138
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-085-0138, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-085-0138
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — Resistor
StatusACTIVE
Maximum Running Torque5.00 INCH-OUNCES IN
Electrical Resistance Per Section20.0 KILOHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power150.0 SINGLE SECTION
Section Quantity1
Shaft Diameter0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
Body StyleRECTANGULAR W/MOUNTING HOLES
Terminal Length0.172 INCHES MINIMUM IN
Mounting MethodTERMINAL
Body Width0.180 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
Body Height0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-50.0 TO 50.0 SINGLE SECTION
Terminal LocationLOWER ADJACENT SIDE TWO ROWS LOCATION NOT OTHERWISE SPECIFIED
Center to Center Distance Between Center Terminal and Outside Terminal0.100 INCHES NOMINAL IN
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Lateral Distance Between Mounting Hole Centers0.520 INCHES NOMINAL IN
Center to Center Distance Between Terminal Rows0.100 INCHES NOMINAL IN
Shaft Length0.045 INCHES MAXIMUM IN
Specification/standard Data81349-MIL-R-27208/4 GOVERNMENT SPECIFICATION
Body Length0.540 INCHES MAXIMUM IN
Center to Center Distance Between Terminals0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
Power Dissipation Rating Per Section in Watts0.75 FREE AIR SINGLE SECTION
Reliability IndicatorNOT ESTABLISHED
Actuator Travel Control FeatureCONTINUOUS MOTION
Test Data Document81349-MIL-R-27208 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-5.0 TO 5.0 SINGLE SECTION
Terminal Type and Quantity3 PIN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5905-01-016-2367 POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON
Possible match (shared part number)
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
947147-4203 C/1 Advisory reference — outside the item-of-supply concept
Litton Systems Inc. Div Navigation Systems Division
418239-36 C/1 Advisory reference — outside the item-of-supply concept
U.S. Government activity
RT22C2X203 2/2 Government specification standardization
U.S. Government activity
MILR27208-4 4/1 Identification reference
U.S. Government activity
Related Parts
5905-01-016-2367POSSIBLE MATCH
RESISTOR,VARIABLE,WIRE WOUND,NON

Frequently Asked Questions

What is NSN 5905-00-085-0138?

NSN 5905-00-085-0138 is a Resistor,variable,wire Wound,non, classified under FSC 5905, Resistor. Status: active.

What NSN replaces 5905-00-085-0138?

1 possible match (shared part number, not a government interchangeability claim): 5905-01-016-2367. Verify interchangeability with system specifications before substitution.

What are the specifications of 5905-00-085-0138?

Key specifications for 5905-00-085-0138: Maximum Running Torque: 5.00 INCH-OUNCES IN; Overall Height: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN; Electrical Resistance Per Section: 20.0 KILOHMS SINGLE SECTION; Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power: 150.0 SINGLE SECTION. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-085-0138 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com