PartsTable TECHNICAL DATA SHEET
NSN 5905-00-079-8634Government record, cited

Resistor, Variable, Nonwire Wound,5905-00-079-8634

NSN 5905-00-079-8634 · NIIN 000798634 · Part number 11069568
Us Army Aviation and Missile Command · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 18876
Government record, cited
NSN 5905-00-079-8634 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-079-8634. Manufacturer of record part number: 11069568.
Also searched as  5905-00-079-8634 · 5905000798634 · NIIN 000798634 · 00-079-8634 · FSC 5905 Resistor · CAGE 18876 · 11069568 · 20SF6096 · 9866
Nearby stock numbers  ·
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Body Diameter: 2.000 INCHES NOMINAL IN
  • Electrical Resistance Per Section: 2.5 KILOHMS SINGLE SECTION
  • Mounting Lip Depth: 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN
  • Undercut Width: 0.0550 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM IN
  • Section Quantity: 1
  • Shaft Diameter: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
  • Undercut Diameter: 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN
Identification
  • NSN: 5905-00-079-8634
  • NIIN: 000798634
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 11069568
  • Manufacturer: Us Army Aviation and Missile Command
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-079-8634, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Us Army Aviation and Missile Command. Government technical data includes 28 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-079-8634
Primary Part Number11069568
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — Resistor
ManufacturerUs Army Aviation and Missile Command
StatusACTIVE
Body Diameter2.000 INCHES NOMINAL IN
Electrical Resistance Per Section2.5 KILOHMS SINGLE SECTION
Mounting Lip Depth0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN
Undercut Width0.0550 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM IN
Section Quantity1
Shaft Diameter0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Undercut Diameter1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN
Fragility FactorMODERATELY RUGGED
Function Characteristic Per SectionSINGLE SECTION EQUATION
Body StyleCYLINDRICAL SERVO MOUNTED
Overall Diameter2.218 INCHES NOMINAL IN
Tap Location From Ccw Terminal Per Section in Ohms1250.0 SINGLE SECTION
Mounting MethodCLAMP RING(S)
Fixed Tap Quantity Per Section1 SINGLE SECTION
Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius-400.0 TO 400.0 SINGLE SECTION
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Mounting Lip Diameter2.0000 INCHES NOMINAL IN
Features ProvidedHUMIDITY PROOF
Shaft StyleROUND
Actuator TypeSINGLE SHAFT
Shaft Length0.437 INCHES NOMINAL IN
Pilot Diameter1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
Body Length1.000 INCHES NOMINAL IN
Pilot Length0.0630 INCHES NOMINAL IN
Bearing TypeBALL SHAFT
Reliability IndicatorNOT ESTABLISHED
Cubic Measure3.141 CUBIC INCHES
Test Data Document18876-13059259 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 4
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
2815-00-423-4563R-1123 POSSIBLE MATCH
GUIDE,VALVE STEM
Possible match (shared part number)Cooper Machinery Services Llc
4510-01-218-84409866 POSSIBLE MATCH
EXTENSION,FAUCET
Possible match (shared part number)Dover Corp Groen Div
5120-01-399-9117J9866 POSSIBLE MATCH
SCREW STARTER,HAND
Possible match (shared part number)The Stanley Works Dba Stanley Proto
6515-01-572-7773145.202 POSSIBLE MATCH
HAND IMPLANT MODULE SET
Possible match (shared part number)Depuy Synthes Sales Inc Dba Depuy Synthes Trauma Div Depuy Synthes Sales, Inc., D/b/a Depuy Synthes Trauma
Cross-Reference Index
Part NumberManufacturer
20SF6096 Es Beta, Inc Dba Betatronix Div Betatronix (USA)
9866 Sensor Systems, L.l.c. Dba Sensor Systems Llc (USA)
11069568 PRIMARY Us Army Aviation and Missile Command (USA)
Related Parts
2815-00-423-4563POSSIBLE MATCH
GUIDE,VALVE STEM
R-1123
4510-01-218-8440POSSIBLE MATCH
EXTENSION,FAUCET
9866
5120-01-399-9117POSSIBLE MATCH
SCREW STARTER,HAND
J9866
6515-01-572-7773POSSIBLE MATCH
HAND IMPLANT MODULE SET
145.202

Frequently Asked Questions

What is NSN 5905-00-079-8634?

NSN 5905-00-079-8634 is a Resistor,variable,nonwire Wound,, manufactured by Us Army Aviation and Missile Command, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-079-8634?

NSN 5905-00-079-8634 has 3 manufacturer part numbers on file: 20SF6096 (Es Beta, Inc Dba Betatronix Div Betatronix), 9866 (Sensor Systems, L.l.c. Dba Sensor Systems Llc), 11069568 (Us Army Aviation and Missile Command).

What NSN replaces 5905-00-079-8634?

4 possible matches (shared part number, not a government interchangeability claim): 2815-00-423-4563, 4510-01-218-8440, 5120-01-399-9117. Verify interchangeability with system specifications before substitution.

What are the specifications of 11069568?

Key specifications for 11069568: Body Diameter: 2.000 INCHES NOMINAL IN; Electrical Resistance Per Section: 2.5 KILOHMS SINGLE SECTION; Mounting Lip Depth: 0.0880 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM IN; Undercut Width: 0.0550 INCHES MINIMUM AND 0.0850 INCHES MAXIMUM IN. 28 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-079-8634 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com