PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

4911Resistor,variable,wire Wound,non

Ohmite Holding, L.l.c. Dba Ohmite Manufacturing · NSN 5905-00-022-7412 · FSC 5905 · No Item Name Available
Verified by PartsTable
NSN 5905-00-022-7412 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-022-7412. Primary manufacturer part number: 4911.
Features
  • Resistor,variable,wire Wound,non — FSC 5905
  • Overall Diameter: 0.515 INCHES MAXIMUM IN
  • Reliability Indicator: NOT ESTABLISHED
  • Body Diameter: 0.515 INCHES MAXIMUM IN
  • Body Style: CYLINDRICAL BUSHING MOUNTED
  • Nonturn Device Location: AT 3 OCLOCK
  • Rotary Actuator Travel in Angular Deg: 300.0 NOMINAL
  • Power Dissipation Rating Per Section in Watts: 7.5 HEAT SINK SINGLE SECTION
Applications
  • Electrical power distribution
  • Signal transmission
  • Equipment interconnection
  • Circuit regulation and filtering
  • Signal conditioning
General Description

The Resistor,variable,wire Wound,non, cataloged under National Stock Number 5905-00-022-7412, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Ohmite Holding, L.l.c. Dba Ohmite Manufacturing. Government technical data includes 28 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 2 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 9 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-022-7412
Primary Part Number4911
Item NameResistor,variable,wire Wound,non
FSC / FSG5905 / 59 — No Item Name Available
ManufacturerOhmite Holding, L.l.c. Dba Ohmite Manufacturing
StatusACTIVE
Overall Diameter0.515 INCHES MAXIMUM IN
Reliability IndicatorNOT ESTABLISHED
Body Diameter0.515 INCHES MAXIMUM IN
Body StyleCYLINDRICAL BUSHING MOUNTED
Nonturn Device LocationAT 3 OCLOCK
Rotary Actuator Travel in Angular Deg300.0 NOMINAL
Power Dissipation Rating Per Section in Watts7.5 HEAT SINK SINGLE SECTION
Mounting MethodSTANDARD BUSHING
Terminal LocationREAR END LOCATION NOT OTHERWISE SPECIFIED
Electrical Resistance Per Section35.0 OHMS SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power340.0 SINGLE SECTION
Ambient Temp in Deg Celsius Per Section at Full Rated Power40.0 SINGLE SECTION
Temp Coefficient of Resistance Wire Per Section in Ppm Per Deg Celsius-20.0 TO 20.0 SINGLE SECTION
Actuator Travel Control FeatureSTOPS
Terminal Type and Quantity3 TAB, SOLDER LUG
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Section Quantity1
Body Length0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
Nonturn Device Radius0.250 INCHES NOMINAL IN
Screw Thread Series DesignatorUNEF
Actuator TypeSINGLE SHAFT
Screw Thread Diameter0.250 INCHES NOMINAL IN
Mounting Bushing Length0.250 INCHES NOMINAL IN
Shaft Diameter0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
Effective Electrical Rotation in Deg Angular Rotation300.0 NOMINAL
Shaft StyleROUND, SLOTTED
Screw Thread Quantity Per Inch32.0
Shaft Length0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
HAZMATNo
Verified Substitutes 9
5330-00-123-26384911RHM1 INTERCHANGEABLE
Seal,plain Encased
Skf Usa Inc. Dba Skf Aerospace Sealing Solutions
5306-00-235-5887 INTERCHANGEABLE
Bolt,special
2940-00-354-0919148244 INTERCHANGEABLE
Filter Element,fluid
Honeywell International Inc Dba Honeywell Div Consumer Products Group
3130-00-393-96094911 INTERCHANGEABLE
Bearing Unit,roller
Rbc Aircraft Products, Inc.
5950-00-918-87154911 INTERCHANGEABLE
Coil,electrical
Gould J D Co Inc
5360-01-017-3916 INTERCHANGEABLE
Spring,helical,compression
5120-01-087-2162GS19526-1 INTERCHANGEABLE
Adapter,fuel Inlet
Hamilton Sundstrand Corporation Dba Collins Aerospace
6695-01-279-62744911 INTERCHANGEABLE
Micrometer,electronic,mutual Ind
Parker-Hannifin Corporation Div Electromechanical Automation Division
9515-01-505-65674911 INTERCHANGEABLE
Sheet,metal
Carlisle & Finch Co
Cross-Reference Index
Part NumberManufacturer
143758-02 Ge Aviation Systems Llc (USA)
4911 PRIMARY Ohmite Holding, L.l.c. Dba Ohmite Manufacturing (USA)
Related Parts
5330-00-123-2638INTERCHANGEABLE
SEAL,PLAIN ENCASED
4911RHM1
5306-00-235-5887INTERCHANGEABLE
BOLT,SPECIAL
2940-00-354-0919INTERCHANGEABLE
FILTER ELEMENT,FLUID
148244
3130-00-393-9609INTERCHANGEABLE
BEARING UNIT,ROLLER
4911
5950-00-918-8715INTERCHANGEABLE
COIL,ELECTRICAL
4911
5360-01-017-3916INTERCHANGEABLE
SPRING,HELICAL,COMPRESSION
5120-01-087-2162INTERCHANGEABLE
ADAPTER,FUEL INLET
GS19526-1
6695-01-279-6274INTERCHANGEABLE
MICROMETER,ELECTRONIC,MUTUAL IND
4911
9515-01-505-6567INTERCHANGEABLE
SHEET,METAL
4911

Frequently Asked Questions

What is NSN 5905-00-022-7412?

NSN 5905-00-022-7412 is a Resistor,variable,wire Wound,non, manufactured by Ohmite Holding, L.l.c. Dba Ohmite Manufacturing, classified under FSC 5905 (No Item Name Available). Status: active.

What are the part numbers for NSN 5905-00-022-7412?

NSN 5905-00-022-7412 has 2 cross-referenced part numbers: 143758-02 (Ge Aviation Systems Llc), 4911 (Ohmite Holding, L.l.c. Dba Ohmite Manufacturing).

What NSN replaces 5905-00-022-7412?

There are 9 known substitutes for 5905-00-022-7412: 5330-00-123-2638, 5306-00-235-5887, 2940-00-354-0919 and 6 more. Verify interchangeability with system specifications before substitution.

What are the specifications of 4911?

Key specifications for 4911: Overall Diameter: 0.515 INCHES MAXIMUM IN; Reliability Indicator: NOT ESTABLISHED; Body Diameter: 0.515 INCHES MAXIMUM IN; Body Style: CYLINDRICAL BUSHING MOUNTED. 29 total characteristics are documented in the Federal Logistics Information System.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com