PartsTable
Technical Data Sheet
Download PDF

5900127 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5900127: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.625 INCHES NOMINAL IN, length: 1.625 INCHES NOMINAL IN, hole_diameter: 0.188 INCHES NOMINAL IN, overall_height: 1.250 INCHES NOMINAL IN, material_thickness: 0.032 INCHES NOMINAL IN, loop/holding_dimension: 0.686 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-046-3303, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5900127
NSN: 5340-00-046-3303
FSC: 5340 — Hardware, Commercial
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
width0.625 INCHES NOMINAL IN
length1.625 INCHES NOMINAL IN
hole_diameter0.188 INCHES NOMINAL IN
overall_height1.250 INCHES NOMINAL IN
material_thickness0.032 INCHES NOMINAL IN
loop/holding_dimension0.686 INCHES NOMINAL IN
NSN5340-00-046-3303
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5900127 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.625 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.686 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
WIDTH: 0.625 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.250 INCHES NOMINAL IN
LENGTH1.625 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.686 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
WIDTH0.625 INCHES NOMINAL IN
HOLE DIAMETER0.188 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
65A102C97-13Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5340000238573Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5900127?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5900127?
5900127 is a CLIP,SPRING TENSION.
What parts can replace 5900127?
There are 2 known substitutes for 5900127: 65A102C97-13, 5340000238573. Substitute compatibility should be verified for your specific system.
What is the NSN for 5900127?
5900127 is cataloged in the U.S. Government catalog under NSN 5340-00-046-3303. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5900127

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.