PartsTable
Technical Data Sheet
Download PDF

59 — TAPE,INSULATION,ELECTRICAL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

59: TAPE,INSULATION,ELECTRICAL.

The TAPE,INSULATION,ELECTRICAL is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: COPPER ALLOY OVERALL, overall_length: 2.660 INCHES NOMINAL IN, special_features: O/D 0.690 IN; STAINLESS STEEL SPRINGS AND PINS IN, nominal_inside_diameter_hose_accommodated: 0.625 INCHES ALL ENDS IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-011-3114, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 59
NSN: 5310-00-011-3114
NIINs: 000113114, 000499423, 000520211, 000609798, 001004404, 001007312, 001505202, 002128060, 002167936, 002215963, 002218914, 002766228, 002917620, 003186435, 003446058, 004323799, 005451631, 005485888, 006068326, 006411635, 006431309, 006493072, 006494287, 006494768, 008013261, 008256277, 008897535, 008993212, 009015597, 009415278, 009505690, 009561171, 009821982, 010823189, 010854917, 012165595, 012574913, 013054883, 013553471, 015731956
FSC: 5310 — Nuts and Washers
CAGE: 72800 — EATON CORP ENGINEERED FASTENERS DIV (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
overall_length2.660 INCHES NOMINAL IN
special_featuresO/D 0.690 IN; STAINLESS STEEL SPRINGS AND PINS IN
nominal_inside_diameter_hose_accommodated0.625 INCHES ALL ENDS IN
NSN5310-00-011-3114
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 59 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.489 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.047 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 1 STYLE AND A CLASS
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
HOLE DIAMETER: 0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.489 INCHES MAXIMUM IN
MATERIAL THICKNESS0.047 INCHES MINIMUM AND 0.057 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 STYLE AND A CLASS
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER0.255 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
135X25Reference document
Same NSN cross-reference
Reference document — Secondary reference
187201Reference document
Same NSN cross-reference
Reference document — Secondary reference
56430Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35337-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
113114Reference document
Same NSN cross-reference
Reference document — Secondary reference
7435-98Z3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 59?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 59?
59 is a TAPE,INSULATION,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 59?
There are 9 known substitutes for 59: 135X25, 187201, 56430 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 59?
59 is cataloged in the U.S. Government catalog under NSN 5310-00-011-3114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 59

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.