PartsTable
Technical Data Sheet
Download PDF

58A5A77-41 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

58A5A77-41: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.781 INCHES NOMINAL IN, length: 0.395 INCHES NOMINAL IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, overall_height: 0.457 INCHES NOMINAL IN, surface_treatment: SILVER OVERALL, material_thickness: 0.010 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-721-7956, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
58A5A77-41
NSN: 5340-00-721-7956
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
width0.781 INCHES NOMINAL IN
length0.395 INCHES NOMINAL IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
overall_height0.457 INCHES NOMINAL IN
surface_treatmentSILVER OVERALL
material_thickness0.010 INCHES NOMINAL IN
loop/holding_dimension0.375 INCHES NOMINAL IN
distance_from_loop_center_to_end0.265 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5340-00-721-7956
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 58A5A77-41 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.395 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.375 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.265 INCHES NOMINAL IN
•
SURFACE TREATMENT: SILVER OVERALL
•
WIDTH: 0.781 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.457 INCHES NOMINAL IN
LENGTH0.395 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION0.375 INCHES NOMINAL IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.265 INCHES NOMINAL IN
SURFACE TREATMENTSILVER OVERALL
WIDTH0.781 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
330C959H14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6001-7CReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 58A5A77-41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 58A5A77-41?
58A5A77-41 is a CLIP,SPRING TENSION.
What parts can replace 58A5A77-41?
There are 2 known substitutes for 58A5A77-41: 330C959H14, 6001-7C. Substitute compatibility should be verified for your specific system.
What is the NSN for 58A5A77-41?
58A5A77-41 is cataloged in the U.S. Government catalog under NSN 5340-00-721-7956. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 58A5A77-41