PartsTable
Technical Data Sheet
58A164B137-9 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN, center_hole_diameter: 0.239 INCHES NOMINAL IN, cross-sectional_height: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-022-9018, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
58A164B137-9
NSN: 5331-01-022-9018
FSC: 5331 — O-RING
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
center_hole_diameter0.239 INCHES NOMINAL IN
cross-sectional_height0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
NSN5331-01-022-9018
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 58A164B137-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
OUTSIDE DIAMETER: 0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
MATERIAL: RUBBER SILICONE CLASS Q
CENTER HOLE DIAMETER: 0.239 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.356 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
MATERIALRUBBER SILICONE CLASS Q
CENTER HOLE DIAMETER0.239 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
2052169Interchangeable
interchangeable cross-reference
interchangeable
647169-000Interchangeable
interchangeable cross-reference
interchangeable
3721Interchangeable
interchangeable cross-reference
interchangeable
3902Interchangeable
interchangeable cross-reference
interchangeable
7346846-03Interchangeable
interchangeable cross-reference
interchangeable
AS568-902ZZR765CL2BGR70Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 58A164B137-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 58A164B137-9?
58A164B137-9 is a O-RING.
What parts can replace 58A164B137-9?
There are 11 known substitutes for 58A164B137-9: 2052169, 647169-000, 3721 and 8 more. Substitute compatibility should be verified for your specific system.
Is 58A164B137-9 still available?
58A164B137-9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 58A164B137-9