PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 589910
589910 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, second_end_style: RADIUS, pin_overall_length: 0.500 INCHES NOMINAL IN, pin_overall_diameter: 0.1880 INCHES NOMINAL IN, first_end_taper_angle: 10.0 DEGREES NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-663-9598, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
589910
NSN: 5315-00-663-9598
FSC: 5315
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
second_end_styleRADIUS
pin_overall_length0.500 INCHES NOMINAL IN
pin_overall_diameter0.1880 INCHES NOMINAL IN
first_end_taper_angle10.0 DEGREES NOMINAL
second_end_corner_radius0.063 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-00-663-9598
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 589910 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END STYLE: RADIUS
•
SECOND END CORNER RADIUS: 0.063 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
FIRST END TAPER ANGLE: 10.0 DEGREES NOMINAL
•
MATERIAL: STEEL OVERALL
•
PIN OVERALL DIAMETER: 0.1880 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
PIN OVERALL LENGTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END STYLERADIUS
SECOND END CORNER RADIUS0.063 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
FIRST END TAPER ANGLE10.0 DEGREES NOMINAL
MATERIALSTEEL OVERALL
PIN OVERALL DIAMETER0.1880 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
PIN OVERALL LENGTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
425 3 IN.Interchangeable
interchangeable cross-reference
interchangeable
70006385325Interchangeable
interchangeable cross-reference
interchangeable
7510PL2193725Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 589910?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 589910?
589910 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 589910?
There are 3 known substitutes for 589910: 425 3 IN., 70006385325, 7510PL2193725. Substitute compatibility should be verified for your specific system.
Is 589910 still available?
589910 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 589910

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026