PartsTable
Technical Data Sheet
Download PDF

589570-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

589570-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, fork_depth: 0.160 INCHES NOMINAL IN, shank_length: 0.530 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.0942 INCHES MINIMUM AND 0.0952 INCHES MAXIMUM IN, overall_width: 0.163 INCHES MINIMUM AND 0.168 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-998-8412, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
589570-1
NSN: 5340-00-998-8412
FSC: 5340 — Hardware, Commercial
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
fork_depth0.160 INCHES NOMINAL IN
shank_length0.530 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
hole_diameter0.0942 INCHES MINIMUM AND 0.0952 INCHES MAXIMUM IN
overall_width0.163 INCHES MINIMUM AND 0.168 INCHES MAXIMUM IN
thread_length0.450 INCHES NOMINAL ROD CONNECTION IN
overall_height0.250 INCHES NOMINAL IN
shank_diameter0.190 INCHES NOMINAL IN
fork_span_width0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-00-998-8412
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 589570-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.190 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.033 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END: 0.130 INCHES NOMINAL IN
•
THREAD LENGTH: 0.450 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.530 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.190 INCHES NOMINAL IN
OVERALL HEIGHT0.250 INCHES NOMINAL IN
FORK SPAN WIDTH0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
FORK ARM THICKNESS0.033 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
DISTANCE FROM PIVOT PINHOLE CENTER TO FORK END0.130 INCHES NOMINAL IN
THREAD LENGTH0.450 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.530 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.163 INCHES MINIMUM AND 0.168 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 589570-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 589570-1?
589570-1 is a CLEVIS,ROD END.
What is the NSN for 589570-1?
589570-1 is cataloged in the U.S. Government catalog under NSN 5340-00-998-8412. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 589570-1