588.10-300000-006 — PIN,GROOVED,HEADLESS

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

588.10-300000-006: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.1705 INCHES MINIMUM AND 0.1710 INCHES MAXIMUM IN, material: STEEL COMP 420 OVERALL, overall_length: 1.606 INCHES MINIMUM AND 1.616 INCHES MAXIMUM IN, undercut_width: 0.068 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN, first_end_style: CHAMFERED, hardness_rating: 50.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-979-9716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

588.10-300000-006

NSN: 5315-00-979-9716
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: D0078 — DIEHL DEFENCE GMBH & CO. KG (DEU)

SPECIFICATIONS

diameter	0.1705 INCHES MINIMUM AND 0.1710 INCHES MAXIMUM IN
material	STEEL COMP 420 OVERALL
overall_length	1.606 INCHES MINIMUM AND 1.616 INCHES MAXIMUM IN
undercut_width	0.068 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
first_end_style	CHAMFERED
hardness_rating	50.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
effective_length	1.428 INCHES MINIMUM AND 1.440 INCHES MAXIMUM IN
second_end_style	CHAMFERED
special_features	LONG END GROOVE FLANK 30 DEG. BY 0.030 IN. LG,SHORT END GROOVE FLANK 30 DEG. BY 0.015 IN. LG IN
style_designator	GROOVE
surface_treatment	PASSIVATE OVERALL
undercut_diameter	0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
NSN	5315-00-979-9716

COMPONENT DIAGRAM

KEY FEATURES

•

UNDERCUT WIDTH: 0.068 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.015 INCHES NOMINAL IN

•

UNDERCUT DIAMETER: 0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN

•

FIRST END LOCATION: BOTH ENDS

•

SECOND END TAPER ANGLE: 30.0 DEGREES NOMINAL

•

FIRST END STYLE: CHAMFERED

•

HARDNESS RATING: 50.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL

•

STYLE DESIGNATOR: GROOVE

TECHNICAL CHARACTERISTICS

UNDERCUT WIDTH	0.068 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.015 INCHES NOMINAL IN
UNDERCUT DIAMETER	0.092 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
FIRST END LOCATION	BOTH ENDS
SECOND END TAPER ANGLE	30.0 DEGREES NOMINAL
FIRST END STYLE	CHAMFERED
HARDNESS RATING	50.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATOR	GROOVE
DIAMETER	0.1705 INCHES MINIMUM AND 0.1710 INCHES MAXIMUM IN
OVERALL LENGTH	1.606 INCHES MINIMUM AND 1.616 INCHES MAXIMUM IN

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 1

2166577Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 588.10-300000-006?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 588.10-300000-006?

588.10-300000-006 is a PIN,GROOVED,HEADLESS.

What parts can replace 588.10-300000-006?

There is 1 known substitute for 588.10-300000-006: 2166577. Substitute compatibility should be verified for your specific system.

What is the NSN for 588.10-300000-006?

588.10-300000-006 is cataloged in the U.S. Government catalog under NSN 5315-00-979-9716. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

588.10-300000-006 — PIN,GROOVED,HEADLESS

Request a Quote — 588.10-300000-006