588.10-000110-007: NUT,PLAIN,KNURLED.
The NUT,PLAIN,KNURLED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OVERALL, nut_style: KNURLED, nut_diameter: 0.640 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.
Government catalog under NSN 5310-01-244-5279, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 302 OR STEEL COMP 303 OVERALL |
| nut_style | KNURLED |
| nut_diameter | 0.640 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN |
| thread_class | 2B |
| nut_thickness | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| thread_series | UNIFIED NATIONAL COARSE (UNC) |
| special_features | END IS ONLY 0.250 IN. DEEP; OPPOSITE END HAS AN INSIDE DIAMETER OF 0.465 IN MIN. AND 0.475 IN MAX AND 0.750 IN. DEEP IN |
| thread_direction | RIGHT-HAND |
| surface_treatment | PASSIVATE OVERALL |
| nominal_thread_size | 0.190 INCHES IN |
| thread_quantity_per_inch | 24 |
| material_document_and_classification | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR AISI ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| NSN | 5310-01-244-5279 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR AISI ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| NOMINAL THREAD SIZE | 0.190 INCHES IN |
| NUT DIAMETER | 0.640 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN |
| NUT THICKNESS | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| SPECIAL FEATURES | END IS ONLY 0.250 IN. DEEP; OPPOSITE END HAS AN INSIDE DIAMETER OF 0.465 IN MIN. AND 0.475 IN MAX AND 0.750 IN. DEEP IN |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| NUT STYLE | KNURLED |
No substitute or cross-reference records for this part.