PartsTable
Technical Data Sheet
Download PDF

587878-2 — TERMINAL BOARD

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

587878-2: TERMINAL BOARD.

The TERMINAL BOARD is a the manufacturer industrial component. Key specifications include material: STEEL TERMINALS, body_style: STRIP, head_height: 0.094 INCHES NOMINAL IN, overall_height: 0.406 INCHES NOMINAL IN, board_thickness: 0.060 INCHES IN, style_designator: STANDARD. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-685-5725, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
587878-2
NSN: 5340-00-685-5725
NIINs: 006855725, 011903438
FSC: 5340 — Hardware, Commercial
CAGE: 82918 — THE BOEING COMPANY DIV LEGACY WICHITA (USA)
SPECIFICATIONS
materialSTEEL TERMINALS
body_styleSTRIP
head_height0.094 INCHES NOMINAL IN
overall_height0.406 INCHES NOMINAL IN
prong_quantity6
board_thickness0.060 INCHES IN
style_designatorSTANDARD
surface_treatmentCADMIUM
board_constructionSOLID CONSTRUCTION
board_overall_height0.650 INCHES IN
board_overall_length0.750 INCHES IN
head_outside_diameter1.562 INCHES NOMINAL IN
NSN5340-00-685-5725
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 587878-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.094 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 1.375 INCHES NOMINAL IN
•
MATERIAL ACCOMMODATED THICKNESS: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STANDARD
•
PRONG OUTSIDE DIAMETER: 1.391 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM
•
HEAD OUTSIDE DIAMETER: 1.562 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.406 INCHES NOMINAL IN
HEAD HEIGHT0.094 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER1.375 INCHES NOMINAL IN
MATERIAL ACCOMMODATED THICKNESS0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
STYLE DESIGNATORSTANDARD
PRONG OUTSIDE DIAMETER1.391 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM
HEAD OUTSIDE DIAMETER1.562 INCHES NOMINAL IN
MATERIALSTEEL
PRONG QUANTITY6
SUBSTITUTES & CROSS-REFERENCES 5
8872221-104Reference document
Same NSN cross-reference
Reference document — Secondary reference
BACP0B-54Reference document
Same NSN cross-reference
Reference document — Secondary reference
SS48132Reference document
Same NSN cross-reference
Reference document — Secondary reference
8SS-48132Reference document
Same NSN cross-reference
Reference document — Secondary reference
BACP20B54Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 587878-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 587878-2?
587878-2 is a TERMINAL BOARD.
What parts can replace 587878-2?
There are 5 known substitutes for 587878-2: 8872221-104, BACP0B-54, SS48132 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 587878-2?
587878-2 is cataloged in the U.S. Government catalog under NSN 5340-00-685-5725. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 587878-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.