PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 58760
58760 ✓ Verified by PartsTable
Dataflex · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Frees up valuable desk space and keeps those binders you use every day within easy reach. Simply hooks onto the toolbar. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.563 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, outside_diameter: 7.506 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-973-8742, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
58760
NSN: 5330-00-973-8742
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.563 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
outside_diameter7.506 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter7.500 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter5.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-973-8742
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 58760 MFR: Dataflex ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 7.500 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
ACCOMMODATED SHAFT DIAMETER: 5.875 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
SEAL WIDTH: 0.563 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
OUTSIDE DIAMETER: 7.506 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER7.500 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
ACCOMMODATED SHAFT DIAMETER5.875 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.563 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OUTSIDE DIAMETER7.506 INCHES NOMINAL IN
MATERIALSTEEL CASE
SURFACE TREATMENTPLASTIC CASE
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
9157160Interchangeable
interchangeable cross-reference
interchangeable
31-377-1000Interchangeable
interchangeable cross-reference
interchangeable
4994-1Interchangeable
interchangeable cross-reference
interchangeable
49881Interchangeable
interchangeable cross-reference
interchangeable
49881 PIECE 2Interchangeable
interchangeable cross-reference
interchangeable
49941JInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 58760?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 58760?
58760 is a FITTING,LUBRICATION manufactured by Dataflex.
What parts can replace 58760?
There are 9 known substitutes for 58760: 9157160, 31-377-1000, 4994-1 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 58760?
58760 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-973-8742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 58760

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026