PartsTable
Technical Data Sheet
Download PDF

587218 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

587218: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLATE, nut_height: 0.250 INCHES NOMINAL IN, plate_width: 0.750 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-00-721-3402, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
587218
NSN: 5310-00-721-3402
FSC: 5310 — Nuts and Washers
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLATE
nut_height0.250 INCHES NOMINAL IN
plate_width0.750 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
plate_thickness0.250 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
nominal_thread_size0.164 INCHES IN
gripping_prong_length0.188 INCHES NOMINAL IN
nut_mounting_provisionGRIPPING PRONGS
NSN5310-00-721-3402
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 587218 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.250 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
PLATE WIDTH: 0.750 INCHES NOMINAL IN
•
GRIPPING PRONG LENGTH: 0.188 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
GRIPPING PRONG QUANTITY: 3
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT HEIGHT: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.250 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
PLATE WIDTH0.750 INCHES NOMINAL IN
GRIPPING PRONG LENGTH0.188 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
GRIPPING PRONG QUANTITY3
NOMINAL THREAD SIZE0.164 INCHES IN
NUT HEIGHT0.250 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
NUT STYLEPLATE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 587218?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 587218?
587218 is a NUT,PLAIN,PLATE.
What is the NSN for 587218?
587218 is cataloged in the U.S. Government catalog under NSN 5310-00-721-3402. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 587218