PartsTable
Technical Data Sheet
Download PDF

5870-2 — SOLENOID,ELECTRICAL

✓ Government record, cited
Dataflex · HOSE FITTING
PRODUCT OVERVIEW

5870-2: SOLENOID,ELECTRICAL.

Because the toolbar is front-mounted, you can adjust the distance between its poles. This lets you install it anywhere on a desk, using either a desk clamp mount or bolt-through desk mount. Cables are easily hidden in the toolbar's cable duct to create a tidy, professional impression.

- Toolbar assembly with a rail length of 1200 mm - Comes with a desk clamp mount and bolt-through desk mount - Cables run neatly inside the toolbar’s cable duct - Suitable for a desktop thickness of 5 up to 40 (clamp) or 50 mm (bolt through) - Pole height 450 mm - Pole diameter 40 mm This part is cataloged in the U.S. Government catalog under NSN 4730-00-540-0286, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
5870-2
NSN: 4730-00-540-0286
NIINs: 005400286, 006868537, 008284159
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 84483 — ERICO FASTENING SYSTEMS (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
duty_typeCONTINUOUS
body_styleCYLINDRICAL FRAME
flow_angle90.0 DEGREES
leg_length1.000 INCHES NOMINAL FIRST END IN
seat_angle45.0 DEGREES FIRST END
body_length1.542 INCHES MINIMUM AND 1.582 INCHES MAXIMUM IN
storage_typeGENERAL PURPOSE WAREHOUSE
thread_class2A FIRST END A
body_diameter0.992 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
cubic_measure0.397 CUBIC INCHES
current_rating1.0 AMPERES MAXIMUM
NSN4730-00-540-0286
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 5870-2 · Dataflex ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES
•
NOMINAL PIPE SIZE ACCOMMODATED: 0.250 INCHES SECOND END IN
•
CONNECTION STYLE: FLARED (TUBE) FIRST END
•
CONNECTION TYPE: THREADED EXTERNAL PIPE SECOND END
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 0.500 INCHES FIRST END IN
•
LEG LENGTH: 0.875 INCHES NOMINAL SECOND END IN
TECHNICAL CHARACTERISTICS
FLOW ANGLE90.0 DEGREES
NOMINAL PIPE SIZE ACCOMMODATED0.250 INCHES SECOND END IN
CONNECTION STYLEFLARED (TUBE) FIRST END
CONNECTION STYLEPLAIN (PIPE) SECOND END
CONNECTION TYPETHREADED EXTERNAL PIPE SECOND END
CONNECTION TYPETHREADED EXTERNAL TUBE FIRST END
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES FIRST END IN
LEG LENGTH0.875 INCHES NOMINAL SECOND END IN
LEG LENGTH1.000 INCHES NOMINAL FIRST END IN
NOMINAL THREAD SIZE0.625 INCHES FIRST END IN
SUBSTITUTES & CROSS-REFERENCES 1
X12016Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 5870-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5870-2?
5870-2 is a SOLENOID,ELECTRICAL manufactured by Dataflex.
What parts can replace 5870-2?
There is 1 known substitute for 5870-2: X12016. Substitute compatibility should be verified for your specific system.
What is the NSN for 5870-2?
5870-2 is cataloged in the U.S. Government catalog under NSN 4730-00-540-0286. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5870-2