PartsTable
Technical Data Sheet
Download PDF

586R632H01 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

586R632H01: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, shank_length: 0.250 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.220 INCHES NOMINAL IN, overall_length: 0.620 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN, shank_diameter: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-197-8208, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
586R632H01
NSN: 5315-01-197-8208
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 97942 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
shank_length0.250 INCHES NOMINAL IN
thread_class3A A
thread_length0.220 INCHES NOMINAL IN
overall_length0.620 INCHES MINIMUM AND 0.660 INCHES MAXIMUM IN
shank_diameter0.250 INCHES NOMINAL IN
undercut_width0.140 INCHES NOMINAL IN
first_end_styleSLOTTED
second_end_styleSQUARE
style_designatorUNDERCUT
thread_directionRIGHT-HAND
shoulder_diameter0.276 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
NSN5315-01-197-8208
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 586R632H01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.140 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.194 INCHES NOMINAL IN
•
FIRST END LOCATION: SQUARE END
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END SLOT WIDTH: 0.064 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.220 INCHES NOMINAL IN
•
FIRST END STYLE: SLOTTED
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT WIDTH0.140 INCHES NOMINAL IN
UNDERCUT DIAMETER0.194 INCHES NOMINAL IN
FIRST END LOCATIONSQUARE END
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END SLOT WIDTH0.064 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
THREAD LENGTH0.220 INCHES NOMINAL IN
FIRST END STYLESLOTTED
SHANK LENGTH0.250 INCHES NOMINAL IN
STYLE DESIGNATORUNDERCUT
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 586R632H01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 586R632H01?
586R632H01 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 586R632H01?
586R632H01 is cataloged in the U.S. Government catalog under NSN 5315-01-197-8208. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 586R632H01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.