PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 585818
585818 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,END,STRAP is a the manufacturer industrial component. Key specifications include color: BLACK, length: 0.600 INCHES NOMINAL IN, diameter: 0.560 INCHES NOMINAL IN, material: COPPER ALLOY, opening_diameter: 0.470 INCHES NOMINAL IN, style_designator: BALL CLIP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-333-6057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
585818
NSN: 5340-00-333-6057
FSC: 5340
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
colorBLACK
length0.600 INCHES NOMINAL IN
diameter0.560 INCHES NOMINAL IN
materialCOPPER ALLOY
opening_diameter0.470 INCHES NOMINAL IN
style_designatorBALL CLIP
material_thickness0.025 INCHES NOMINAL IN
NSN5340-00-333-6057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 585818 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COLOR: BLACK
•
OPENING DIAMETER: 0.470 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
•
DIAMETER: 0.560 INCHES NOMINAL IN
•
LENGTH: 0.600 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BALL CLIP
TECHNICAL CHARACTERISTICS (FLIS)
COLORBLACK
OPENING DIAMETER0.470 INCHES NOMINAL IN
MATERIALCOPPER ALLOY
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
DIAMETER0.560 INCHES NOMINAL IN
LENGTH0.600 INCHES NOMINAL IN
STYLE DESIGNATORBALL CLIP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
40217Interchangeable
interchangeable cross-reference
interchangeable
149Interchangeable
interchangeable cross-reference
interchangeable
MS51926-3Interchangeable
interchangeable cross-reference
interchangeable
MS51926-4Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-496Interchangeable
interchangeable cross-reference
interchangeable
MS51926-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 585818?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 585818?
585818 is a CLIP,END,STRAP.
What parts can replace 585818?
There are 13 known substitutes for 585818: 40217, 149, MS51926-3 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 585818?
585818 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-333-6057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 585818

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026