PartsTable
Technical Data Sheet
Download PDF

585529 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

585529: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN, material: TITANIUM UNS R50700 OVERALL, loop_width: 0.604 INCHES MINIMUM AND 0.644 INCHES MAXIMUM IN, loop_length: 1.130 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, style_designator: MULTIPLE LOOP. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-010-8474, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
585529
NSN: 5340-00-010-8474
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
diameter0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
materialTITANIUM UNS R50700 OVERALL
loop_width0.604 INCHES MINIMUM AND 0.644 INCHES MAXIMUM IN
loop_length1.130 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN
overall_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designatorMULTIPLE LOOP
material_thickness0.027 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end1.125 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.912 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
NSN5340-00-010-8474
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 585529 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP WIDTH: 0.604 INCHES MINIMUM AND 0.644 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: MULTIPLE LOOP
•
DIAMETER: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.027 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.125 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.912 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
•
MATERIAL: TITANIUM UNS R50700 OVERALL
TECHNICAL CHARACTERISTICS
LOOP WIDTH0.604 INCHES MINIMUM AND 0.644 INCHES MAXIMUM IN
STYLE DESIGNATORMULTIPLE LOOP
DIAMETER0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
OVERALL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
MATERIAL THICKNESS0.027 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.125 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.912 INCHES MINIMUM AND 0.927 INCHES MAXIMUM IN
MATERIALTITANIUM UNS R50700 OVERALL
LOOP LENGTH1.130 INCHES MINIMUM AND 1.180 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 585529?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 585529?
585529 is a CLAMP,LOOP.
What is the NSN for 585529?
585529 is cataloged in the U.S. Government catalog under NSN 5340-00-010-8474. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 585529

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.