PartsTable
Technical Data Sheet
Download PDF

585238-1 — SEAT,HELICAL COMPRESSION SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

585238-1: SEAT,HELICAL COMPRESSION SPRING.

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: STEEL COMP 630, design_type: SOLID, end_diameter: 0.8670 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM IN, bore_diameter: 0.8100 INCHES MINIMUM AND 0.8200 INCHES MAXIMUM IN, overall_height: 0.2150 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM IN, style_designator: SEAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-054-6390, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
585238-1
NSN: 5340-01-054-6390
FSC: 5340 — Hardware, Commercial
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialSTEEL COMP 630
design_typeSOLID
end_diameter0.8670 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM IN
bore_diameter0.8100 INCHES MINIMUM AND 0.8200 INCHES MAXIMUM IN
overall_height0.2150 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM IN
style_designatorSEAT
surface_treatmentPASSIVATE
first_step_diameter1.1270 INCHES MINIMUM AND 1.1300 INCHES MAXIMUM IN
countersink_diameter1.0670 INCHES MINIMUM AND 1.0900 INCHES MAXIMUM IN
countersink_angle_in_deg45.0
distance_from_end_to_first_step0.1350 INCHES MINIMUM AND 0.1540 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-054-6390
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 585238-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE IN DEG: 45.0
•
FIRST STEP DIAMETER: 1.1270 INCHES MINIMUM AND 1.1300 INCHES MAXIMUM IN
•
END DIAMETER: 0.8670 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM IN
•
COUNTERSINK DIAMETER: 1.0670 INCHES MINIMUM AND 1.0900 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
DISTANCE FROM END TO FIRST STEP: 0.1350 INCHES MINIMUM AND 0.1540 INCHES MAXIMUM IN
•
DESIGN TYPE: SOLID
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.2150 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM IN
COUNTERSINK ANGLE IN DEG45.0
FIRST STEP DIAMETER1.1270 INCHES MINIMUM AND 1.1300 INCHES MAXIMUM IN
END DIAMETER0.8670 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM IN
COUNTERSINK DIAMETER1.0670 INCHES MINIMUM AND 1.0900 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
DISTANCE FROM END TO FIRST STEP0.1350 INCHES MINIMUM AND 0.1540 INCHES MAXIMUM IN
DESIGN TYPESOLID
STYLE DESIGNATORSEAT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
42672AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 585238-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 585238-1?
585238-1 is a SEAT,HELICAL COMPRESSION SPRING.
What parts can replace 585238-1?
There is 1 known substitute for 585238-1: 42672A. Substitute compatibility should be verified for your specific system.
What is the NSN for 585238-1?
585238-1 is cataloged in the U.S. Government catalog under NSN 5340-01-054-6390. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 585238-1