PartsTable
Technical Data Sheet
Download PDF

58452 — RING,INFLATABLE SEA

✓ Government record, cited
Verbatim · ORING SEAL
PRODUCT OVERVIEW

58452: RING,INFLATABLE SEA.

By choosing Verbatim's range of cartridges, you can be absolutely confident that the appropriate model will work perfectly with its compatible printer. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 4.736 INCHES MINIMUM AND 4.746 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 4.330 INCHES MINIMUM AND 4.340 INCHES MAXIMUM IN, cross-sectional_thickness: 0.073 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-580-2449, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
58452
NSN: 5330-00-580-2449
NIINs: 005802449, 011236055
FSC: 5330 — Packing and Gasket Materials
CAGE: 64829 — ARVINMERITOR INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter4.736 INCHES MINIMUM AND 4.746 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter4.330 INCHES MINIMUM AND 4.340 INCHES MAXIMUM IN
cross-sectional_thickness0.073 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-580-2449
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 58452 MFR: Verbatim ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.073 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 4.736 INCHES MINIMUM AND 4.746 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 4.330 INCHES MINIMUM AND 4.340 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.073 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER4.736 INCHES MINIMUM AND 4.746 INCHES MAXIMUM IN
APERTURE DIAMETER4.330 INCHES MINIMUM AND 4.340 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
105208Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 58452?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 58452?
58452 is a RING,INFLATABLE SEA manufactured by Verbatim.
What parts can replace 58452?
There is 1 known substitute for 58452: 105208. Substitute compatibility should be verified for your specific system.
What is the NSN for 58452?
58452 is cataloged in the U.S. Government catalog under NSN 5330-00-580-2449. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 58452