The Plate,connector End, cataloged under National Stock Number 5845-01-139-2738, is classified within Federal Supply Class 5845 (Underwater Sound Equipment) of the Communication, Detection, and Coherent Radiation Equipment group. Government technical data includes 1 specification, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5845-01-139-2738 |
| Item Name | Plate,connector End |
| FSC / FSG | 5845 / 58 — Underwater Sound Equipment |
| Status | ACTIVE |
| General Characteristics Item Description | CORROSION RESISTING STEEL 0.25 IN. THICK,304L,WITH NO. 1 FINISH PER QQ-S-766; 2.345 TO 2.355 IN. H; 1.995 TO 2.005 IN. W AT BOTTOM AND 0.250 IN. UP TWO SIDES; FROM THAT POINT BOTH SIDES TAPER TO 2.315 TO 2.320 IN. W; TOP CORNERS 0.156 RADIUS; HOLE 1.300 TO 1.320 IN. DIA THROUGH PLATE WITH SHOULDER 1.66 IN. DIA AND 0.03 IN. DEEP AROUND HOLE ON INSIDE OF PLATE; CENTERLINE OF HOLE 1.0 IN. FROM SIDE OF BOTTOM AND 1.380 IN. UP FROM BOTTOM; KEYWAY NOTCH CENTERED ON TOP OF HOLE; SIDES AND TOP MACHINE FINISHED TO 125 MICROINCHES IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5516156-1 | C/1 Advisory reference — outside the item-of-supply concept Naval Sea Systems Command |
| 200926-1 | 3/9 Design control — primary reference U.S. Government activity |
| 5516156 | C/1 Advisory reference — outside the item-of-supply concept Naval Sea Systems Command |
NSN 5845-01-139-2738 is a Plate,connector End, classified under FSC 5845, Underwater Sound Equipment. Status: active.
Key specifications for 5845-01-139-2738: General Characteristics Item Description: CORROSION RESISTING STEEL 0.25 IN. THICK,304L,WITH NO. 1 FINISH PER QQ-S-766; 2.345 TO 2.355 IN. H; 1.995 TO 2.005 IN. W AT BOTTOM AND 0.250 IN. UP TWO SIDES; FROM THAT POINT BOTH SIDES TAPER TO 2.315 TO 2.320 IN. W; TOP CORNERS 0.156 RADIUS; HOLE 1.300 TO 1.320 IN. DIA THROUGH PLATE WITH SHOULDER 1.66 IN. DIA AND 0.03 IN. DEEP AROUND HOLE ON INSIDE OF PLATE; CENTERLINE OF HOLE 1.0 IN. FROM SIDE OF BOTTOM AND 1.380 IN. UP FROM BOTTOM; KEYWAY NOTCH CENTERED ON TOP OF HOLE; SIDES AND TOP MACHINE FINISHED TO 125 MICROINCHES IN. 1 specification is documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.