PartsTable
Technical Data Sheet
Download PDF

5840247 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5840247: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, surface_treatment: ZINC OVERALL, fastening_device_type: EAR CLAMPED, end_item_identification: 4210-01-486-1035 TRUCK, FIREFIGHTING. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-517-3677, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5840247
NSN: 5340-01-517-3677
FSC: 5340 — Hardware, Commercial
CAGE: 25281 — OETIKER, INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
special_featuresCALLED PINCH-ON CLAMP; ONE EAR STYLE; NOMINAL OD 1.125 INCH; MAXIMUM OD 1.126 INCH; MINIMUM OD 1.004 INCH; MAXIMUM PSI AT 70 DEG F 440 IN
surface_treatmentZINC OVERALL
fastening_device_typeEAR CLAMPED
end_item_identification4210-01-486-1035 TRUCK, FIREFIGHTING
NSN5340-01-517-3677
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5840247 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: EAR CLAMPED
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FASTENING DEVICE TYPEEAR CLAMPED
SPECIAL FEATURESCALLED PINCH-ON CLAMP; ONE EAR STYLE; NOMINAL OD 1.125 INCH; MAXIMUM OD 1.126 INCH; MINIMUM OD 1.004 INCH; MAXIMUM PSI AT 70 DEG F 440 IN
SURFACE TREATMENTZINC OVERALL
END ITEM IDENTIFICATION4210-01-486-1035 TRUCK, FIREFIGHTING
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
80-6039-0001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5840247?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5840247?
5840247 is a CLAMP,LOOP.
What parts can replace 5840247?
There is 1 known substitute for 5840247: 80-6039-0001. Substitute compatibility should be verified for your specific system.
What is the NSN for 5840247?
5840247 is cataloged in the U.S. Government catalog under NSN 5340-01-517-3677. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5840247