PartsTable / COMPONENT / 583K955
583K955
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
RETAINER,HELICAL COMPRESSION SPR. Key specifications include material: STEEL COMP 1008 OR STEEL COMP 1010, overall_height: 0.125 INCHES NOMINAL IN, style_designator: IRREGULAR, end_hole_diameter: 0.531 INCHES NOMINAL IN, surface_treatment: ZINC, body_inside_diameter: 1.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-360-7701, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
583K955
NSN: 5340-00-360-7701 FSC: 5340 CAGE: 83299 — HYSTER-YALE GROUP, INC. DBA YALE MATERIALS HANDLING (USA)
SPECIFICATIONS
material STEEL COMP 1008 OR STEEL COMP 1010 overall_height 0.125 INCHES NOMINAL IN style_designator IRREGULAR end_hole_diameter 0.531 INCHES NOMINAL IN surface_treatment ZINC body_inside_diameter 1.000 INCHES NOMINAL IN body_outside_diameter 1.032 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN casehardening_indicator NOT CASEHARDENED material_document_and_classification SAE 1008 ASSN STD 1ST MATERIAL RESPONSE AND SAE 1010 ASSN STD 2ND MATERIAL RESPONSE NSN 5340-00-360-7701
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 583K955
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• END HOLE DIAMETER: 0.531 INCHES NOMINAL IN
• MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1008 ASSN STD 1ST MATERIAL RESPONSE AND SAE 1010 ASSN STD 2ND MATERIAL RESPONSE
• STYLE DESIGNATOR: IRREGULAR
• MATERIAL: STEEL COMP 1008 OR STEEL COMP 1010
• BODY INSIDE DIAMETER: 1.000 INCHES NOMINAL IN
• BODY OUTSIDE DIAMETER: 1.032 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
END HOLE DIAMETER 0.531 INCHES NOMINAL IN MATERIAL DOCUMENT AND CLASSIFICATION SAE 1008 ASSN STD 1ST MATERIAL RESPONSE AND SAE 1010 ASSN STD 2ND MATERIAL RESPONSE STYLE DESIGNATOR IRREGULAR SURFACE TREATMENT ZINC MATERIAL STEEL COMP 1008 OR STEEL COMP 1010 OVERALL HEIGHT 0.125 INCHES NOMINAL IN BODY INSIDE DIAMETER 1.000 INCHES NOMINAL IN BODY OUTSIDE DIAMETER 1.032 INCHES MINIMUM AND 1.052 INCHES MAXIMUM IN CASEHARDENING INDICATOR NOT CASEHARDENED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
852810 Interchangeable interchangeable cross-reference
interchangeable
852851 Interchangeable interchangeable cross-reference
interchangeable
353134 Interchangeable interchangeable cross-reference
interchangeable
SRA1-25 Interchangeable interchangeable cross-reference
interchangeable
SRA-1.25 Interchangeable interchangeable cross-reference
interchangeable
1171-43 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 583K955?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 583K955?
583K955 is a RETAINER,HELICAL COMPRESSION SPR.
What parts can replace 583K955?
There are 9 known substitutes for 583K955: 852810, 852851, 353134 and 6 more. Substitute compatibility should be verified for your specific system.
Is 583K955 still available?
583K955 is currently cancelled.
Request a Quote — 583K955