PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 583873
583873 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 AND STEEL COMP 420 OVERALL, hole_diameter: 0.763 INCHES MINIMUM AND 0.783 INCHES MAXIMUM IN, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 1.271 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-3873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
583873
NSN: 5310-00-058-3873
FSC: 5310
CAGE: 00000
SPECIFICATIONS
materialSTEEL COMP 302 AND STEEL COMP 420 OVERALL
hole_diameter0.763 INCHES MINIMUM AND 0.783 INCHES MAXIMUM IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter1.271 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
nondefinitive_spec/std_data2 STYLE AND C CLASS
material_document_and_classificationFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-058-3873
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 583873 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.271 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302 AND STEEL COMP 420 OVERALL
•
MATERIAL THICKNESS: 0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.763 INCHES MINIMUM AND 0.783 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
NONDEFINITIVE SPEC/STD DATA: 2 STYLE AND C CLASS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.271 INCHES MAXIMUM IN
MATERIALSTEEL COMP 302 AND STEEL COMP 420 OVERALL
MATERIAL THICKNESS0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
HOLE DIAMETER0.763 INCHES MINIMUM AND 0.783 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
NONDEFINITIVE SPEC/STD DATA2 STYLE AND C CLASS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OR 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
122-660345 PC 30Interchangeable
interchangeable cross-reference
interchangeable
200954Interchangeable
interchangeable cross-reference
interchangeable
122-5277738 ITEM 33Interchangeable
interchangeable cross-reference
interchangeable
00737 SH 41 ST164Interchangeable
interchangeable cross-reference
interchangeable
164-18Interchangeable
interchangeable cross-reference
interchangeable
120771Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 583873?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 583873?
583873 is a WASHER,LOCK.
What parts can replace 583873?
There are 16 known substitutes for 583873: 122-660345 PC 30, 200954, 122-5277738 ITEM 33 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 583873?
583873 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-058-3873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 583873

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026