PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 583-508-9001
583-508-9001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, construction: ONE-PIECE, outside_diameter: 0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN, retainer_thickness: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN, packing_inside_diameter: 0.149 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN, packing_ring_cross-sectional_diameter: 0.061 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-865-7106, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
583-508-9001
NSN: 5330-00-865-7106
FSC: 5330
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
materialSTEEL RETAINER
constructionONE-PIECE
outside_diameter0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
retainer_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
packing_inside_diameter0.149 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
packing_ring_cross-sectional_diameter0.061 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
NSN5330-00-865-7106
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 583-508-9001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.061 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
•
PACKING INSIDE DIAMETER: 0.149 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
•
RETAINER THICKNESS: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
MATERIAL: STEEL RETAINER
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.401 INCHES MINIMUM AND 0.411 INCHES MAXIMUM IN
PACKING RING CROSS-SECTIONAL DIAMETER0.061 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
PACKING INSIDE DIAMETER0.149 INCHES MINIMUM AND 0.169 INCHES MAXIMUM IN
RETAINER THICKNESS0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
MATERIALSTEEL RETAINER
CONSTRUCTIONONE-PIECE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
28272Interchangeable
interchangeable cross-reference
interchangeable
228072PT9Interchangeable
interchangeable cross-reference
interchangeable
228072-9Interchangeable
interchangeable cross-reference
interchangeable
600-70-18Interchangeable
interchangeable cross-reference
interchangeable
81H2-1Interchangeable
interchangeable cross-reference
interchangeable
HQ600-70-18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 583-508-9001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 583-508-9001?
583-508-9001 is a PACKING WITH RETAINER.
What parts can replace 583-508-9001?
There are 12 known substitutes for 583-508-9001: 28272, 228072PT9, 228072-9 and 9 more. Substitute compatibility should be verified for your specific system.
Is 583-508-9001 still available?
583-508-9001 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 583-508-9001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026