PartsTable
Technical Data Sheet
Download PDF

582R209H08 — HANDLE,BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

582R209H08: HANDLE,BAIL.

The HANDLE,BAIL is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, inside_length: 2.500 INCHES NOMINAL IN, stock_diameter: 0.500 INCHES NOMINAL IN, mounting_method: PIN(S) AND SLOTTED SHAFT, special_features: HANDLE IS MOUNTED IN SLOTTED FERRULES; FERRULES THD 0.190-32 UNF 2B,0.380 IN. DEEP IN, style_designator: EYE HOOK.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-078-9131, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
582R209H08
NSN: 5340-01-078-9131
FSC: 5340 — Hardware, Commercial
CAGE: 48306 — NORTHROP GRUMMAN SUPPORT SERVICES CORP (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
inside_length2.500 INCHES NOMINAL IN
stock_diameter0.500 INCHES NOMINAL IN
mounting_methodPIN(S) AND SLOTTED SHAFT
special_featuresHANDLE IS MOUNTED IN SLOTTED FERRULES; FERRULES THD 0.190-32 UNF 2B,0.380 IN. DEEP IN
style_designatorEYE HOOK
surface_treatmentANODIZE OVERALL
mounting_facility_length1.500 INCHES NOMINAL IN
mounting_facility_quantity2
material_document_and_classificationQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 3,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length3.000 INCHES NOMINAL IN
NSN5340-01-078-9131
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 582R209H08 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 3,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
INSIDE LENGTH: 2.500 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 3.000 INCHES NOMINAL IN
•
MOUNTING FACILITY LENGTH: 1.500 INCHES NOMINAL IN
•
MOUNTING METHOD: PIN(S) AND SLOTTED SHAFT
•
STYLE DESIGNATOR: EYE HOOK
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 3,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
INSIDE LENGTH2.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH3.000 INCHES NOMINAL IN
MOUNTING FACILITY LENGTH1.500 INCHES NOMINAL IN
MOUNTING METHODPIN(S) AND SLOTTED SHAFT
STYLE DESIGNATOREYE HOOK
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STOCK DIAMETER0.500 INCHES NOMINAL IN
SPECIAL FEATURESHANDLE IS MOUNTED IN SLOTTED FERRULES; FERRULES THD 0.190-32 UNF 2B,0.380 IN. DEEP IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
VPC249Reference document
Same NSN cross-reference
Reference document — Secondary reference
B519-014-H08Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 582R209H08?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 582R209H08?
582R209H08 is a HANDLE,BAIL.
What parts can replace 582R209H08?
There are 2 known substitutes for 582R209H08: VPC249, B519-014-H08. Substitute compatibility should be verified for your specific system.
What is the NSN for 582R209H08?
582R209H08 is cataloged in the U.S. Government catalog under NSN 5340-01-078-9131. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 582R209H08

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.