PartsTable
Technical Data Sheet
Download PDF

5823K25 — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5823K25: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.25 INCHES MINIMUM AND 1.32 INCHES MAXIMUM IN, material: RUBBER DAMPER, load_rating: 70.0 POUNDS MAXIMUM LBS, stud_length: 0.63 INCHES NOMINAL ALL THREADED STUD IN, thread_size: 0.312-18 ALL THREADED PORTIONS, style_designator: STUD AND NUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-608-4805, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5823K25
NSN: 5340-01-608-4805
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
height1.25 INCHES MINIMUM AND 1.32 INCHES MAXIMUM IN
materialRUBBER DAMPER
load_rating70.0 POUNDS MAXIMUM LBS
stud_length0.63 INCHES NOMINAL ALL THREADED STUD IN
thread_size0.312-18 ALL THREADED PORTIONS
style_designatorSTUD AND NUT
major_outside_diameter1.25 INCHES NOMINAL IN
end_item_identification5410-01-592-9463
NSN5340-01-608-4805
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5823K25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD RATING: 70.0 POUNDS MAXIMUM LBS
•
STYLE DESIGNATOR: STUD AND NUT
•
STUD LENGTH: 0.63 INCHES NOMINAL ALL THREADED STUD IN
•
HEIGHT: 1.25 INCHES MINIMUM AND 1.32 INCHES MAXIMUM IN
•
THREAD SIZE: 0.312-18 ALL THREADED PORTIONS
•
MATERIAL: RUBBER DAMPER
TECHNICAL CHARACTERISTICS
LOAD RATING70.0 POUNDS MAXIMUM LBS
STYLE DESIGNATORSTUD AND NUT
STUD LENGTH0.63 INCHES NOMINAL ALL THREADED STUD IN
HEIGHT1.25 INCHES MINIMUM AND 1.32 INCHES MAXIMUM IN
THREAD SIZE0.312-18 ALL THREADED PORTIONS
END ITEM IDENTIFICATION5410-01-592-9463
MATERIALRUBBER DAMPER
MATERIALSTEEL COMP 304 INSERT
MATERIALSTEEL COMP 304 STUD
MAJOR OUTSIDE DIAMETER1.25 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
17-3-3349-1Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5823K25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5823K25?
5823K25 is a MOUNT,RESILIENT,UTILITY.
What parts can replace 5823K25?
There is 1 known substitute for 5823K25: 17-3-3349-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 5823K25?
5823K25 is cataloged in the U.S. Government catalog under NSN 5340-01-608-4805. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5823K25

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.