PartsTable
Technical Data Sheet
Download PDF

582358-1 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

582358-1: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 347 OVERALL, nut_style: HEXAGON, nut_height: 0.453 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-055-3540, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
582358-1
NSN: 5310-01-055-3540
FSC: 5310 — Nuts and Washers
CAGE: 70210 — HONEYWELL INTERNATIONAL INC. DIV AEROSPACE - TORRANCE (USA)
SPECIFICATIONS
materialSTEEL COMP 347 OVERALL
nut_styleHEXAGON
nut_height0.453 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.312 INCHES NOMINAL IN
nominal_thread_size0.164 INCHES IN
bearing_surface_typeFLAT
thread_quantity_per_inch32
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencySPACER, CONTAINER CATALYST
NSN5310-01-055-3540
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 582358-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT HEIGHT: 0.453 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT HEIGHT0.453 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSPACER, CONTAINER CATALYST
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 1
582033-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 582358-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 582358-1?
582358-1 is a NUT,PLAIN,HEXAGON.
What parts can replace 582358-1?
There is 1 known substitute for 582358-1: 582033-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 582358-1?
582358-1 is cataloged in the U.S. Government catalog under NSN 5310-01-055-3540. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 582358-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.