PartsTable
Technical Data Sheet
Download PDF

582-7067148-12 — SCREW RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

582-7067148-12: SCREW RETAINER.

The SCREW RETAINER is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, overall_height: 3.020 INCHES NOMINAL IN, overall_diameter: 6.750 INCHES NOMINAL IN, end_item_identification: SEAWOLF CLASS SSN; VALVE - CAPSTAN, thread_size_and_series/type_designator: 6.750-8-2A UNIFIED NATIONAL COARSE (UNC) A, part_name_assigned_by_controlling_agency: RETAINER, SCREW. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-500-4313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
582-7067148-12
NSN: 5340-01-500-4313
FSC: 5340 — Hardware, Commercial
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialNICKEL ALLOY
overall_height3.020 INCHES NOMINAL IN
overall_diameter6.750 INCHES NOMINAL IN
end_item_identificationSEAWOLF CLASS SSN; VALVE - CAPSTAN
thread_size_and_series/type_designator6.750-8-2A UNIFIED NATIONAL COARSE (UNC) A
part_name_assigned_by_controlling_agencyRETAINER, SCREW
NSN5340-01-500-4313
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 582-7067148-12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 6.750 INCHES NOMINAL IN
•
MATERIAL: NICKEL ALLOY
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 6.750-8-2A UNIFIED NATIONAL COARSE (UNC) A
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT3.020 INCHES NOMINAL IN
OVERALL DIAMETER6.750 INCHES NOMINAL IN
SPECIAL FEATURESUPPER PORTION IS EXTERNALLY THREADED AND HAS 6.750 OD, 4.880 ID AND IS 1.63-1.65 HIGH AND HAS 2 MOUNTING HOLES 0.312 DIAM, COUNTERBORED 0.50, CENTERED 1.00 INCH FROM OUTER EDGE; LOWER PORTION HAS 6.350 OD, 2.880 ID AND IS 1.37 - 1.39 HIGH; FINISH THREADS WITH ANAEROBIC COMPOUND PER MIL-S-22473, GRADE AV (RED) IN
PART NAME ASSIGNED BY CONTROLLING AGENCYRETAINER, SCREW
END ITEM IDENTIFICATIONSEAWOLF CLASS SSN; VALVE - CAPSTAN
MATERIALNICKEL ALLOY
THREAD SIZE AND SERIES/TYPE DESIGNATOR6.750-8-2A UNIFIED NATIONAL COARSE (UNC) A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 582-7067148-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 582-7067148-12?
582-7067148-12 is a SCREW RETAINER.
What is the NSN for 582-7067148-12?
582-7067148-12 is cataloged in the U.S. Government catalog under NSN 5340-01-500-4313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 582-7067148-12