PartsTable
Technical Data Sheet
PartsTable / O-RING / 581R130H17
581R130H17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN, cross-sectional_height: 0.042 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-013-8332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
581R130H17
NSN: 5331-01-013-8332
FSC: 5331 — O-RING
CAGE: 97942 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
materialRUBBER
center_hole_diameter0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
cross-sectional_height0.042 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
NSN5331-01-013-8332
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 581R130H17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
•
CROSS-SECTIONAL HEIGHT: 0.042 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM IN
MATERIALRUBBER
CROSS-SECTIONAL HEIGHT0.042 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
6177Interchangeable
interchangeable cross-reference
interchangeable
213Interchangeable
interchangeable cross-reference
interchangeable
60-3576Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
30796Interchangeable
interchangeable cross-reference
interchangeable
QK363Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 581R130H17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 581R130H17?
581R130H17 is a O-RING.
What parts can replace 581R130H17?
There are 20 known substitutes for 581R130H17: 6177, 213, 60-3576 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 581R130H17?
581R130H17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-013-8332. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 581R130H17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026