PartsTable
Technical Data Sheet
Download PDF

581-6985418-1 — CONNECTING LINK,RIGID

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

581-6985418-1: CONNECTING LINK,RIGID.

The CONNECTING LINK,RIGID is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400, thickness: 2.996 INCHES MINIMUM AND 3.002 INCHES MAXIMUM IN, bore_diameter: 3.0000 INCHES NOMINAL IN, surface_finish: 125 MICROINCHES OVERALL, outside_diameter: 5.880 INCHES NOMINAL IN, style_designator: ROUND SECTIONAL. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-495-4285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
581-6985418-1
NSN: 3120-01-495-4285
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400
thickness2.996 INCHES MINIMUM AND 3.002 INCHES MAXIMUM IN
bore_diameter3.0000 INCHES NOMINAL IN
surface_finish125 MICROINCHES OVERALL
outside_diameter5.880 INCHES NOMINAL IN
special_featuresCOUNTER BORE HOLES ARE ON PERIMETER OF 5.880 DIAMETER AT CHORD LOCATION (NOT AT RADIAL LOCATION). SPACING OF FOUR(4) SECURING HOLES ARE 4.625 C/C HORIZONTALLY AND 1.750 C/C VERTICALLY
style_designatorROUND SECTIONAL
nominal_thread_size0.500 INCHES ALL HOLES IN
securing_hole_quantity4
end_item_identificationANCHOR HANDLING DRIVE ASSEMBLY FOR NSSN CLASS SUBMARINE
counterbore_depth_and_location0.9655 INCHES NOMINAL ALL HOLES IN
securing_hole_type_and_locationTHREADED-COUNTERBORED ALL HOLES
NSN3120-01-495-4285
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 581-6985418-1 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 2
H611-1420-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
581-6985418Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 581-6985418-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 581-6985418-1?
581-6985418-1 is a CONNECTING LINK,RIGID.
What parts can replace 581-6985418-1?
There are 2 known substitutes for 581-6985418-1: H611-1420-1, 581-6985418. Substitute compatibility should be verified for your specific system.
What is the NSN for 581-6985418-1?
581-6985418-1 is cataloged in the U.S. Government catalog under NSN 3120-01-495-4285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 581-6985418-1