PartsTable
Technical Data Sheet
Download PDF

580698 — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

580698: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, alignment_type: RIGID, overall_height: 0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, W/O SEATING RING, bore_smallest_diameter: 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-912-6315, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
580698
NSN: 3110-00-912-6315
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 45934 — ONTIC ENGINEERING & MANUFACTURING, INC DBA ONTIC US (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
alignment_typeRIGID
overall_height0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorGROOVED RACE SURFACE, W/O SEATING RING
bore_smallest_diameter0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
overall_outside_diameter0.4335 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
thrust_directional_capability_designationSINGLE
NSN3110-00-912-6315
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 580698 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE, W/O SEATING RING
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 0.4335 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
•
BORE SMALLEST DIAMETER: 0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
OVERALL HEIGHT0.1855 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORGROOVED RACE SURFACE, W/O SEATING RING
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER0.4335 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER0.1248 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
MATERIALSTEEL OUTER RING
MATERIALCOPPER ALLOY RETAINER
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 580698?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 580698?
580698 is a BEARING,BALL,THRUST.
What is the NSN for 580698?
580698 is cataloged in the U.S. Government catalog under NSN 3110-00-912-6315. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 580698