The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 8620 OVERALL, tooth_form: STANDARD, pitch_diameter: 3.7500 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES, teeth_quantity: 30, hardness_rating: 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 3020-00-308-3940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
580433
NSN:3020-00-308-3940 FSC:3020 — Gears, Pulleys, Sprockets, and Transmission Chain CAGE:02978 — RENK AMERICA LLC DIV RENK AMERICA (USA)
SPECIFICATIONS
material
STEEL COMP 8620 OVERALL
tooth_form
STANDARD
pitch_diameter
3.7500 INCHES NOMINAL IN
pressure_angle
20.0000 DEGREES
teeth_quantity
30
hardness_rating
58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
style_designator
PROTRUDING HUBS
face_nominal_width
1.000 INCHES IN
end_nominal_diameter
1.747 INCHES BOTH ENDS IN
hub_style_designator
1 GROOVE BOTH ENDS
nominal_overall_length
3.120 INCHES IN
nominal_outside_diameter
3.998 INCHES IN
NSN
3020-00-308-3940
COMPONENT DIAGRAM
KEY FEATURES
•
TEETH QUANTITY: 30
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 1.060 INCHES FIRST END IN
•
HARDNESS RATING: 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL OVERALL LENGTH: 3.120 INCHES IN
•
STYLE DESIGNATOR: PROTRUDING HUBS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-13048 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PITCH DIAMETER: 3.7500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEETH QUANTITY
30
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END
1.060 INCHES FIRST END IN
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END
1.028 INCHES SECOND END IN
HARDNESS RATING
58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL OVERALL LENGTH
3.120 INCHES IN
STYLE DESIGNATOR
PROTRUDING HUBS
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-S-13048 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER
3.7500 INCHES NOMINAL IN
TOOTH FORM
STANDARD
HUB STYLE DESIGNATOR
1 GROOVE BOTH ENDS
OTHER ITEMS IN FSC 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 580433?
580433 is a GEAR,SPUR.
What parts can replace 580433?
There is 1 known substitute for 580433: 8698590. Substitute compatibility should be verified for your specific system.
What is the NSN for 580433?
580433 is cataloged in the U.S. Government catalog under NSN 3020-00-308-3940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.