PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5800765-9009-068
5800765-9009-068 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, special_features: BLACK COLOR, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-969-6502, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5800765-9009-068
NSN: 5340-00-969-6502
FSC: 5340
CAGE: C0426 — HENSOLDT SENSORS GMBH (DEU)
SPECIFICATIONS
diameter0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
special_featuresBLACK COLOR
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.035 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
loop_inside_diameter0.312 INCHES NOMINAL IN
specification/standard_data80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.604 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.420 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
NSN5340-00-969-6502
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5800765-9009-068 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SPECIFICATION/STANDARD DATA: 80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
DIAMETER: 0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.420 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SPECIFICATION/STANDARD DATA80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
DIAMETER0.167 INCHES MINIMUM AND 0.177 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.312 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.420 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
SPECIAL FEATURESBLACK COLOR
DISTANCE FROM LOOP CENTER TO TONGUE END0.604 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
SK06-4144Upgraded Successor
successor cross-reference
successor
5867064144Upgraded Successor
successor cross-reference
successor
33-24Upgraded Successor
successor cross-reference
successor
F3NY-312NACUpgraded Successor
successor cross-reference
successor
F3NY-312BKUpgraded Successor
successor cross-reference
successor
5/16-3Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5800765-9009-068?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5800765-9009-068?
5800765-9009-068 is a CLAMP,LOOP.
What parts can replace 5800765-9009-068?
There are 26 known substitutes for 5800765-9009-068: SK06-4144, 5867064144, 33-24 and 23 more. Substitute compatibility should be verified for your specific system.
Is 5800765-9009-068 still available?
5800765-9009-068 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5800765-9009-068

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026