PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5800583-560003.103
5800583-560003.103 ✓ Verified by PartsTable
— · CABLE ASSEMBLY
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The 5800583-560003.103 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-033-5512, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5800583-560003.103
NSN: 5999-00-033-5512
FSC: 5999
CAGE: C0426 — HENSOLDT SENSORS GMBH (DEU)
SPECIFICATIONS
Part Number5800583-560003.103
NSN5999-00-033-5512
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 5800583-560003.103 MFR 5800583-560003.103
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.140 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.141 INCHES NOMINAL IN
•
ENVIRONMENTAL PROTECTION MATERIAL LOCATION: THROUGHOUT RF SHIELDING GASKET
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.140 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.813 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
APERTURE DIAMETER: 0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.140 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.141 INCHES NOMINAL IN
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONTHROUGHOUT RF SHIELDING GASKET
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.140 INCHES MINIMUM AND 0.148 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.016 INCHES MINIMUM AND 0.024 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.813 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
APERTURE DIAMETER0.750 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
OVERALL LENGTH1.094 INCHES MINIMUM AND 1.110 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
34015-16Upgraded Successor
successor cross-reference
successor
42-80412Upgraded Successor
successor cross-reference
successor
2665251-3Upgraded Successor
successor cross-reference
successor
263Upgraded Successor
successor cross-reference
successor
262Upgraded Successor
successor cross-reference
successor
128439Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 5800583-560003.103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5800583-560003.103?
5800583-560003.103 is a 5800583-560003.103.
What parts can replace 5800583-560003.103?
There are 15 known substitutes for 5800583-560003.103: 34015-16, 42-80412, 2665251-3 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5800583-560003.103?
5800583-560003.103 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-033-5512. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5800583-560003.103

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026