PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5800334-2220-001
5800334-2220-001 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 316 OVERALL, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 1.860 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN, pin_overall_diameter: 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-721-7960, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5800334-2220-001
NSN: 5315-00-721-7960
FSC: 5315
CAGE: D8385 — THALES DEUTSCHLAND GMBH DIV CUSTOMER SERVICES (DEU)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 316 OVERALL
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.860 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN
pin_overall_diameter0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-721-7960
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5800334-2220-001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 316 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PIN OVERALL LENGTH: 1.860 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 302 OR STEEL COMP 303S OR STEEL COMP 303SE OR STEEL COMP 316 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
PIN OVERALL LENGTH1.860 INCHES MINIMUM AND 1.880 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
PIN OVERALL DIAMETER0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
A118Interchangeable
interchangeable cross-reference
interchangeable
27R45Interchangeable
interchangeable cross-reference
interchangeable
61917-1Interchangeable
interchangeable cross-reference
interchangeable
BS5-1615PC16Interchangeable
interchangeable cross-reference
interchangeable
BS5-1583PC16Interchangeable
interchangeable cross-reference
interchangeable
13-660-00-028Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5800334-2220-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5800334-2220-001?
5800334-2220-001 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 5800334-2220-001?
There are 6 known substitutes for 5800334-2220-001: A118, 27R45, 61917-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5800334-2220-001?
5800334-2220-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-721-7960. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5800334-2220-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026