PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5800332-9009-014
5800332-9009-014 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.250 INCHES NOMINAL IN, length: 0.625 INCHES NOMINAL IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.330 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-593-9545, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5800332-9009-014
NSN: 5340-00-593-9545
FSC: 5340
CAGE: C0426 — HENSOLDT SENSORS GMBH (DEU)
SPECIFICATIONS
width0.250 INCHES NOMINAL IN
length0.625 INCHES NOMINAL IN
materialSTEEL COMP 1065 OVERALL
hole_diameter0.093 INCHES NOMINAL IN
overall_height0.330 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.007 INCHES NOMINAL IN
loop/holding_dimension0.235 INCHES NOMINAL IN
distance_from_loop_center_to_end0.172 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-593-9545
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5800332-9009-014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LENGTH: 0.625 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.172 INCHES NOMINAL IN
•
WIDTH: 0.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL THICKNESS: 0.007 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1065 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LENGTH0.625 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.172 INCHES NOMINAL IN
WIDTH0.250 INCHES NOMINAL IN
OVERALL HEIGHT0.330 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIAL THICKNESS0.007 INCHES NOMINAL IN
MATERIALSTEEL COMP 1065 OVERALL
LOOP/HOLDING DIMENSION0.235 INCHES NOMINAL IN
HOLE DIAMETER0.093 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
691-20-5215Interchangeable
interchangeable cross-reference
interchangeable
100-200-4-0Interchangeable
interchangeable cross-reference
interchangeable
639492-015Interchangeable
interchangeable cross-reference
interchangeable
100 2004Interchangeable
interchangeable cross-reference
interchangeable
100 2000Interchangeable
interchangeable cross-reference
interchangeable
100 2006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5800332-9009-014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5800332-9009-014?
5800332-9009-014 is a CLIP,SPRING TENSION.
What parts can replace 5800332-9009-014?
There are 8 known substitutes for 5800332-9009-014: 691-20-5215, 100-200-4-0, 639492-015 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5800332-9009-014?
5800332-9009-014 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-593-9545. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5800332-9009-014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026