PartsTable
Technical Data Sheet
PartsTable / O-RING / 5800332-9009-007
5800332-9009-007 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.254 INCHES NOMINAL IN, center_hole_diameter: 2.096 INCHES MINIMUM AND 2.132 INCHES MAXIMUM IN, elongation_percentage: 250 MAXIMUM, cross-sectional_height: 0.070 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-171-9280, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5800332-9009-007
NSN: 5331-00-171-9280
FSC: 5331 — O-RING
CAGE: C0426 — HENSOLDT SENSORS GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter2.254 INCHES NOMINAL IN
center_hole_diameter2.096 INCHES MINIMUM AND 2.132 INCHES MAXIMUM IN
elongation_percentage250 MAXIMUM
cross-sectional_height0.070 INCHES NOMINAL IN
NSN5331-00-171-9280
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5800332-9009-007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.096 INCHES MINIMUM AND 2.132 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 250 MAXIMUM
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 2.254 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.096 INCHES MINIMUM AND 2.132 INCHES MAXIMUM IN
ELONGATION PERCENTAGE250 MAXIMUM
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER2.254 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
10172776Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS29561Interchangeable
interchangeable cross-reference
interchangeable
MS29561-264Interchangeable
interchangeable cross-reference
interchangeable
5303-0600Interchangeable
interchangeable cross-reference
interchangeable
AMS-R-7362Interchangeable
interchangeable cross-reference
interchangeable
AS568-437Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5800332-9009-007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5800332-9009-007?
5800332-9009-007 is a O-RING.
What parts can replace 5800332-9009-007?
There are 22 known substitutes for 5800332-9009-007: 10172776, SAE-AS29561, MS29561-264 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5800332-9009-007?
5800332-9009-007 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-171-9280. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5800332-9009-007

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026