PartsTable
Technical Data Sheet
Download PDF

5800332-1810-001 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5800332-1810-001: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 1.120 INCHES NOMINAL IN, hardness_rating: 40.0 SHORE DUROMETER A NOMINAL OVERALL, fsc_application_data: COUNTERMEASURES SETS, cross-sectional_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-876-3428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5800332-1810-001
NSN: 5330-00-876-3428
FSC: 5330 — Packing and Gasket Materials
CAGE: C0426 — HENSOLDT SENSORS GMBH (DEU)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
overall_width0.750 INCHES NOMINAL IN
overall_length1.120 INCHES NOMINAL IN
hardness_rating40.0 SHORE DUROMETER A NOMINAL OVERALL
fsc_application_dataCOUNTERMEASURES SETS
cross-sectional_thickness0.032 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-3847, CL 2, GR 50 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
outside_edge_to_bolt_hole_center_distance_along_length0.250 INCHES NOMINAL IN
NSN5330-00-876-3428
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5800332-1810-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: COUNTERMEASURES SETS
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL IN
•
HARDNESS RATING: 40.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-3847, CL 2, GR 50 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FSC APPLICATION DATACOUNTERMEASURES SETS
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL IN
HARDNESS RATING40.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-3847, CL 2, GR 50 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.120 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH0.750 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.250 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
440522Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5800332-1810-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5800332-1810-001?
5800332-1810-001 is a GASKET.
What parts can replace 5800332-1810-001?
There is 1 known substitute for 5800332-1810-001: 440522. Substitute compatibility should be verified for your specific system.
What is the NSN for 5800332-1810-001?
5800332-1810-001 is cataloged in the U.S. Government catalog under NSN 5330-00-876-3428. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5800332-1810-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.